Parameters:
Control method: vertical
Suitable for: X-axis milling machine, standard hole diameter 16MM, if your milling screw is not 16MM, please process it.
Motor: 180W, 50Hz
Motor input voltage: 380V
Speed range (r/min): 3, 12, 24, 36, 205
Torque range: 5.6-225N.M
Noise: 50 dB or less

Photo showing:

Feature:

1. Mechanical structure with strong torque.
Breaking through the structure of the traditional POWER TABLE FEET, it adopts mechanical gear transmission, which has strong torque and can withstand fast feed and high feed speed.

2. Strong transmission.
It is driven by a 1/2HP motor and the load is due to the traditional POWER TABLE FEET.

3. Electrical protection.
It is equipped with an electric control box to protect the motor from damage due to overload and ensure the life of the motor.

4. Easy to install.
The user can install it on the milling machine without special techniques and without affecting the precision of the machine.

5. Overload safety trip device.
The gearbox has an overload safety clutch to protect the gears inside the gearbox and has a long service life.

6, low noise, strong lubrication.
The gear box is oil-immersed, the gear transmission is smooth, the noise is small, and the lubrication is strong.

7, 5 kinds of feed speed, suitable for a variety of processing conditions.
Feeding 3MM, 12MM, 24MM, 36MM, 205MM per minute, can provide a variety of processing conditions; another rapid advance and retreat 205MM / min, can save the neutral time of the knife, so that the workbench quickly run to the starting point of processing.

8, the action is light, does not hinder the work schedule.
The gear box is small in size, does not hinder the working stroke, and can be manually fed to directly drive the lead screw of the milling machine, without the gear transmission in the gear box, and the hand feels light.