Welcome
Bevinsee H15 LED Headlight Canbus Error Anti Flicker Canceller Decoder Fits Benz
Product Description
Item Specifics
For bulb size: H15 (Plug-N-Play installation) Operating Voltage:12V DC Total Resistor: 50W 6Ω Capacitance: 16V 10000μF -40~105° Feature
Application This Item will help to solve follow problem,the helpful rate up to 90%(Not 100% can solve your car decoding problem, please Understanding): 1. Bulb flashing or flicker; 2. Radio interference; 3. The light turn off automatically engine starts; 4. Error message caused by OBC (On-Board Computer)/ECU check. This decoder is only suitable for decoding LED lights below 35W, lights greater than 35W are not applicable. Package Included: 2x Canbus Decoders Notice: 1.This item may not solve all compatible issues,that is not the product fault, was caused by the difference of the vehicle systems. 2. Some vehicles(such as Dodge, Chrysler, Jeep, BMW, VW ,AUDI, BENZ, Volvo ...vehicles) may need a more powerful resistor to help solve the above problem. 3. For European cars, this decoders might not 100% (for the LED headlight wattage lower than 55W halogen bulb related "bulb out" issue showing on the car on board computer, this decoder will not work) 4. This LED decoder is polar sensitive, if you plug in this decoder and LED bulb does not light up, please flip the adapter 180 degrees and try again. 5. If you find this item doesn't solve the problem, please contact us first,we will provide profectional suggestions. How To Confirm whether Canbus is needed? This item wasn't exist self-decoding/self-Canbus (anti-flashing/anti-warning) function and DRL (Daytime running light) function!!! -- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases: 1. The headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked). 2. The on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked) 3. The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked). situation 1: use this case to judge whether it need to be decoded. situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test) Feasible Solution: 1. install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger. 2. install the resistor, you need professional installation. 3. using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect. Install Caution: Please fix the decoder to other accessories outside the headlight assembly to avoid shaking! It will be generated large heat during working.Please fix the resistor outside of the headlight housing. FAQ Q1: Will the bulbs suitable for my vehicle? 1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above. 2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand. 3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit! Q2: What if I encounter a dashboard error message or flickering? A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem. Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor. Q4: How to get the best light output? A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page. Q5: What should I do if there is a quality problem? A: Please send ebay message to us, we will solve any problems for you as soon as possible. Q6: The bulbs doesn't fit my vehicle. 1. The bulbs size maybe wrong, pls double check before order. 2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you. Q7: Warrning about polarity A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect. DISCLAIMER
Disclaimer: topmaxmotor parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Porsche, Subaru, Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet, GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury, Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi, Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo, Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn, Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram, Rover, Skoda, Healey, Mini, Smart, Scion, Renault, Seat, Peugeot, Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat, Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
Shipping Policy
Return & Refund
Feedback
About Item
Customer Satisfaction
Visit Our Store For Best Deal! Topmax Motor Store
|
FAQ
Q1: Will the bulbs suitable for my vehicle?
1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above.
2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand.
3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit!
Q2: What if I encounter a dashboard error message or flickering?
A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem.
Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor.
Q4: How to get the best light output?
A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page.
Q5: What should I do if there is a quality problem?
A: Please send ebay message to us, we will solve any problems for you as soon as possible.
Q6: The bulbs doesn't fit my vehicle.
1. The bulbs size maybe wrong, pls double check before order.
2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you.
Q7: Warrning about polarity
A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect.