1、 Power requirements: Use a 220V AC power supply with a safe grounding. When using, the machine must be grounded.
2、 Air source requirements: The compressed air pressure used must be between 0.5 and 1.2 kilograms. It is recommended to use 1.0 kg, which is the most ideal air pressure.
3、 Environmental requirements: Good ventilation and dryness.
4、 Packaging size: 41.5 × 28 × 22.5 cm
5、 Gross/net weight: 4/3.2kg
6、 Warning:
1. Due to the high voltage static electricity generated by this machine, the user must keep the workplace and equipment dry during use. In addition, the machine must be safely grounded and do not unplug the grounding plug, which is important for protecting the machine and preventing electric shock. To avoid danger, always touch the discharge pin to the grounding clip for discharge after each use.
When particles of plastic powder fall into the air, there is a risk of combustion and explosion when they come into contact with a fire source, so all hidden dangers must be eliminated and isolated from all fire sources. Do not use a vacuum cleaner to remove plastic powder on the ground. Wear a dust cover during work to protect personal safety.
7、 Preparation before use:
1. Preparation of spray molded parts: The surface of the sprayed parts should undergo rust removal, oil removal, and phosphating treatment, and the parts should have a dry, smooth, and clean surface.
2. Prepare an oven to place the sprayed parts into the oven for baking. It is best to hang the sprayed parts in an oven using a metal hanger.
3. Prepare a power supply and socket with the same voltage as the spray molding machine. The power supply must be securely grounded.
4. Prepare the air source. The air supply pressure is generally between 0.5 kg and 1.2 kg, and it is recommended to use a 1.0 kg air supply pressure.
5. Fill the dry plastic powder into a bottle, with a suitable amount of plastic powder at a height of about 5 centimeters from the bottom of the bottle.
2、 Air source requirements: The compressed air pressure used must be between 0.5 and 1.2 kilograms. It is recommended to use 1.0 kg, which is the most ideal air pressure.
3、 Environmental requirements: Good ventilation and dryness.
4、 Packaging size: 41.5 × 28 × 22.5 cm
5、 Gross/net weight: 4/3.2kg
6、 Warning:
1. Due to the high voltage static electricity generated by this machine, the user must keep the workplace and equipment dry during use. In addition, the machine must be safely grounded and do not unplug the grounding plug, which is important for protecting the machine and preventing electric shock. To avoid danger, always touch the discharge pin to the grounding clip for discharge after each use.
When particles of plastic powder fall into the air, there is a risk of combustion and explosion when they come into contact with a fire source, so all hidden dangers must be eliminated and isolated from all fire sources. Do not use a vacuum cleaner to remove plastic powder on the ground. Wear a dust cover during work to protect personal safety.
7、 Preparation before use:
1. Preparation of spray molded parts: The surface of the sprayed parts should undergo rust removal, oil removal, and phosphating treatment, and the parts should have a dry, smooth, and clean surface.
2. Prepare an oven to place the sprayed parts into the oven for baking. It is best to hang the sprayed parts in an oven using a metal hanger.
3. Prepare a power supply and socket with the same voltage as the spray molding machine. The power supply must be securely grounded.
4. Prepare the air source. The air supply pressure is generally between 0.5 kg and 1.2 kg, and it is recommended to use a 1.0 kg air supply pressure.
5. Fill the dry plastic powder into a bottle, with a suitable amount of plastic powder at a height of about 5 centimeters from the bottom of the bottle.
