Standard Fusible Fuse-a-Web Iron- On Interfacing 50cm Wide White

50cm Wide

Coployamide

Fuse-A-Web, 50cm wide, the easy & clean way to bond fabric to fabric in applique & craft work.
This is the easy and clean way to affix fabric to fabric in applique and craft work.
It is used in the same way as hemming web, but has the advantage of being 50cm wide,
making it suitable for bonding larger items. It also works as hemming web when cut into strips.

The web is paper backed and the only tools required are scissors and a hot iron.

Instructions for use:

1. Make sure the iron is set at the correct temperature for your fabric. If you are unsure, do a test piece first.
2. Mark out on the paper side the rough size of the item to be bonded.
3. Place the web side on the reverse of the item and iron the paper with a dry heat.
Now trim away the surplus web and paper around the item.
4. Peel off the paper and place the object to be bonded, coated side down onto the fabric in the required position.
5. Cover with a damp cloth and iron on bit by bit over your object, keeping the heat on for no more than 10 seconds
6. To finish, allow the parts to cool down completely and then continue to use the fabric as normal.

Sold in 1 metre lengths, and any multiple lengths will be cut as a continuous length up to the maximum roll size of 25 metres.
Anything less than 25 metres will be sent folded rather than rolled.