52mm 2-1/16" Fuel gauge with sender 0-30 ohms
Fit for: car truck motorcycle ATU UTV marine boat
Face color: Black
Fuel gauge signal: 0-30 ohms
Bezel materials: stainless steel
Display range: (0--Empty)-(30--Full)
Operating current: ≤60mA
Operating temperature: -30 ~ + 75 ℃
Storage temperature: -40 ~ + 85 ℃
Install diameter: 52mm (2-1/16'')
Protection class: IP67
-100% Brand new and high quality.
-Excellent anti-fogging performance.
-316L Stainless steel bezel with curve glass.
-Easy installation with multi-plug socket connection design.
-Black Ground Design With Red Backlight
1.Open a hole in the cowling (your cabin trim and dashboard) with a diameter of 52 mm. Insert the counter into the hole. The panel, which corresponds to the instrument panel, is marked with a convex table. To ensure that there is at least 70 mm of the instrument panel on the back of the instrument.
2.After the instrument is mounted in the plate, tighten with a tight ring.
3.Connect signal Connect the cable, the device housing is directly connected to the 9 ~ 32V power supply.
4. Insert the wiring harness, firmly locked in the table.
Red - + 9-32VDC
Black - Signal input
Orange - Backlight (+)
Blue - Ground (-)
Length: 165mm / 6-1/2" (Length can be customized,if you need longer length of fuel sender, we might charge you extra money , Please contact us before you paid.)
Mounting methods: Standard SAE 5 hole pattern
Diameter of flange mounting: 69mm / 2.72 inch
Output signal: 0-30ohms (ohms can be customized)
Recommends that a minimum distance of 1 "between the tank bottom and the float support collar must be maintained
1x Fuel Level Gauge
1x Wiring Harness
1x Instruction Manual
1x Fuel Sender