Item specifics
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable).
Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag.
See the seller's listing for full details.
MPN:Does Not Apply
Type:DMX Transmitter&Receiver
Features:wifi
Dmx Control:Yes
Country/Region of Manufacture:China
Features:
1. DMX512 wireless receiver/transmrtter transmits standard DMx512 protocol data (generated by console) by wireless way. No time defay when signal data is transmitting signal data is real time and reliably.
2. This product adopts a 2. 4G ISM frequency section. High effective GFSK modulate,communication design; jumping frequency automatically, high anti-jamming ability.
SPecification:
1. 2. 4G wireless DMX512 T/R
2. 126 channels jumping frequency automatically, high anti-jamming ability. To ensure works reliability
3. 7 groups ID code settable, User can use 7 groups individual wireless net without any interfere.
4. Each other in the same place... (Tricolor LED displaying Indicators)
5. Input voltage: 5VDC 50DmA MIN
6. Cornmunication distance 400M (visible distance)
7. Work frequency section : 2. 4G ISM, 126 Channels. frequency section8. Max transmitting power rate 2od Bm
Operating manual:
ID code and LED color corresponding relationshipl :
1:RED, 2 : GREEN, 3 : RED + GREEN, 4 : BLUE, 5 : RED + BLUE, 6 : GREEN + BLUE, 7 : RED + GREEN + BLUE.
1. Press momentary switch above the side led indicator to indicata IDsetting.
2. Press again ID key, to the color ID desired, adding 1 each time you press the switch will advance the color ID code.
3. Working condition:LED constant lit up: No DMX or wireless signal.Red LED flash: Transmitting.Green LED flash: receiving
4. RF frequency 2.4G ISM, it's searching automatically.
5. ID Code "1-7" groups ID code, Press 'KEY' for setting, it only can work under same ID code of transmitter and receiver. (Same LED Color).
Establishing Communication:
1. Power on DMX512 wireless received board first and then following to power up the transmitted boards.
2. Press "key" button to set same ID avalue of transmitted board and received board. Please use diffefent ID value if you need use more than 1 group wireless universais at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value,LED flash more fast once DMX data more fast.
4. Communication was established correctly. Please note some DMX fixtures need to be placed into slave mode for proper DMX control. If in the master mode they will send a DMX signal out the xlr jacks causingthe auto scan transmitter/receivers to go into a transmitter mode due to the dmx signal being present.
5. This unit is for Indoor use only.