Product Description
Temperature adjustment function - the soldering pen has the function of temperature control. The controllable temperature range is 200 ℃ - 450 ℃(there is a knob wheel on the Electronic Soldering Gun for temperature adjust). Different working requirements can be achieved by adjusting the temperature.
Fast heating&Good heat dissipation - Ceramic heating technology is used inside the soldering gun to make the soldering iron heat up quickly and stably. It can reach the peak temperature quickly within 30s.
Portable&Durable- small handle allows users to easily complete most of the welding work, easy to carry, just like a pen.
Environmentally Friendly&Multifunction- All-copper and lead-free soldering iron tip is environmentally friendly and durable.Five different shapes of replaceable soldering iron tips meet different soldering needs.Such as circuit board welding,repair small electronic products, mobile communication equipment, children's toys, etc.Ideal for hobbies, kits, radios, and electronics work.
Specification
Soldering Iron
US plug
Voltage:110V/AC
Power :60W
Temp Range:200°C to 450°C
Temp Adjustable:✔
Color:Blue
Soldering Irons Tips
Standard and easy-to-change.
Free to choose which you need on the welder project.
Strong welding ability
High-quality chrome plating
5 different specifications, easy to use in various working environments
Solder Wire
Weight: About 50g.
Easy to use and carry.
Suitable for repair, rework, and electronics solder.
Our tin wire has good electrical and thermal conductivity, lower melting point, smoother soldering, brighter solder joints, and easier handling
Tips:The temperature needs to reach 300°C to dissolve quickly
Rosin Paste Flux
smooth welding surface,non-toxic,no deterioration,never dry not corrosive to ic and pcb,no-clean solder flux paste
Soldering Stand and Sponge
Comes with a solder stand to support the soldering gun when not in use to prevent high temperature from damage the table. Wet the sponge after using to clean the tip.
Follow The Steps Below To Make Your Welds
1.First of all, make sure that you have all the necessary elements available to carry out your weld.
2.Choose the right tip type.
3.Plug in the iron, set the appropriate temperature, and wait about 30 seconds for the tip to heat.
4.Then check that the parts are clean and not rusted, and clean them if necessary.
5.Then put the parts in contact and apply the hot tip to the contact point.
6.Be careful not to touch the tip or hot parts with bare hands (wear gloves if necessary).
Caution
When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a smoke while and a smoke never comes out again.
Use soldering stand and other aids to avoid bur fingers.
Don't pulled the soldering and other aids to avoid burnt fingers.
After finish the longer life tip face
Don't file the long life tip face and Don't apply too much solder unnecessarily.
Warm Tips
1.Please be really careful when you are using the iron, and keep it somewhere kids can’t reach.
2.Please switch to the 200℃ model when not using the soldering iron. Please do not keep the soldering iron working under high temperature.
3.When welding, do not use too much pressure.
4.To avoid oxidation, please clean soldering iron tip. If there is black oxide on the iron tip, please clean it by wet sponge firstly.
5.Long-time and high-temperature work may shorten its life.
6.Do not leave the soldering iron idle for a long time at the working temperature, it may burn the soldering iron or even other things.
Package Included
1x Temperature Adjust Soldering Iron
1x Roll of LEAD-FREE Solder Wire (50g)
5x Extra Different Soldering Tips
1x Bakelite Iron Stand
1x Rosin Solder Flux
Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause birth defects or other reproductive harm. Remind to wash your hands after using it. For more information reference the official Proposition 65 Warnings Website.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.
Working hours: Monday to Friday
9:00am~18:30pm
We will try our best to assist all our customers, however we only have limited technical knowledge because we only see the items provided by our vendors.
We greatly appreciate your POSITIVE feedback.
Please do NOT leave negative feedback without asking for help.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.