80 Gears Spot Welder Adjustable Spot Welders Handheld Portable Spot Welding Machine Nickel Plate Digital Display Welding Equipment for 18650 Battery Spot Welder
Features:
1. 80 level adjustable. The 80 level power is adjustable, making welding more accurate and effective. 5000mAh large capacity, longer usage time.
2. Dual mode optional. Automatic and manual switching mode, capable of welding mobile phone batteries, supporting the welding of various common nickel transfer mobile phone batteries, coupled with portability, making phone maintenance more convenient.
3. Dual pulse output. Double pulse output, more accurate welding, single hand grip, convenient operation and use, can free up one hand to hold the nickel sheet or fix the battery.
4. LED display screen. The LCD color display screen can view data such as preheating delay time and level. You can see the working status of the product at a glance through the screen.
5. Safety protection. Low voltage/overcurrent/overcharge protection, applicable to 18650 cylindrical lithium batteries, Nickel–metal hydride battery, cadmium, nickel batteries, etc., which are firmly welded.
Specifications:
Project type: Spot welding machine
LCD display: power/gear/delay/voltage/mode
Gear adjustment: 80 gears
Battery type: Lithium polymer battery
Battery capacity: 5000mAh
Design current: 800A (MAX)
Input interface: Type-C
Input parameters: 5V/2.1A
Nickel strip thickness: 0.1-0.2mm
Applicable batteries: 18650, 26650, 32650 and other cylindrical lithium batteries, Nickel–metal hydride battery, cadmium nickel batteries can be soldered solid
Welding method: Visually weld the head at a 60 ° angle to the horizontal plane, while pressing two needles onto the surface of the nickel plate
Attention:
1. After receiving the product, please read the manual carefully.
2. Press and hold the power switch button for 6 minutes, without any action, it will automatically turn off.
3. The thickness of the supporting nickel plate is 0.1-0.2mm.
4. After startup, the product is in automatic welding mode.
5. The welding head can output once after detecting contact with the metal, and can be welded again after lifting.
6. Ensure that the welding surface of the battery is clean, flat, and rust free.
7. Ensure that the nickel plate is clean and flat.
8. Set up a spot welding machine and press it appropriately to ensure good contact between the welding needle and nickel sheet and the battery, without suspension or poor contact.
9. The charging adopts a C-type charger, and the 5V input adopts a 5V/2A charger (high voltage is prohibited). This product supports charging during use.
Package List:
Spot welding machine * 1
TYPE-C cable * 1
Nickel plate * 1
User manual * 1