Features
1. Indicator light, bright light instructions, convenient and easy to understand
2. Switch button, one key on, one key off
3. Test pen, the instrument is equipped with three test pens, fish-eye needle or wire connector diameter does not exceed 10 mm, the pin can be connected to the crocodile clip.
4. Alligator clips were clamped three test pens insulated skin can be detected.
5. The test leads are connected to the test pens, yellow color corresponds to L1, green color to L2, and red color to L3.
6. Battery-free design, portable design without batteries can also work properly, easy to use.
Specifications
Operating voltage: 60~600V (three-phase alternating current)
Maximum withstand voltage: 2000V/minute (pulse voltage 4000V)
Measurable frequency range: 20Hz~400Hz
Continuous use time: 200V ACV, not more than 60 minutes 600V ACV, not more than 4 minutes
Meter size: 85X64X23mm (excluding test leads)
Instructions for use
Connect the test pen of this meter with the tested wire, (not directly by hand pinch) can be a wire, socket or the middle part of the phase line (in the middle part of the phase line measurement, you need to strip the insulation layer of the wire, bare inside the core of the wire can be measured, this time you need to pay special attention to safety, to prevent electrocution, in order to facilitate the user's use, the meter accessories are equipped with special test clips, test clips inserted in the In order to facilitate the use of users, the meter is equipped with a special test clip, insert the test clip into the metal probe of the meter pen and tighten it, it can be conveniently clamped in any place for measurement.) At this point the meter will indicate the status of the open phases and the sequence of the phases based on the light emitting diode (LED) and the buzzer
List
1 x Phase Sequence Meter
3 x Meter pen
3 x Test Clips
1 x Instruction manual
1 x Bag