eBay Listing Design by OCDesignsOnlineacd
Crown Audio XTi 2002 Power Amplifier
The Crown XTi 2002 Power Amplifier delivers up to 475W per channel at 8 ohms and is an ideal solution for sound reinforcement, nightclub installation, bands, theaters, DJ applications and much more. The XTi 2002 offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback. It has a switch-mode universal power supply so it can be used anywhere. It handles a wide range of speaker impedances and outputs for a high degree of system compatibility.

An array of serious control features are implemented and easily accessed via the included HiQnet Band Manager & System Architect software packages. Crown's Peak Plus Limiters provide the ultimate in system performance and protection. There are 3 user-defined fan modes, adjustable EQ, adjustable crossover filters and much more.

  • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet Band Manager and System Architect control software
  • Increased number of presets to a total of 30; 29 of which are user definable
Crown Audio XTi 2002 Power Amplifier
HiQnet Band Manager and System Architect Control Software
3 Year Warranty

Output Power1000W at 2 Ohms Stereo (per Channel)
800W at 4 Ohms Stereo (per Channel)
475W at 8 Ohms Stereo (per Channel)
2000W at 4 Ohms Bridged-Mono
1600W at 8 Ohms Bridged-Mono
Damping Factor20Hz to 1kHz > 500
Input Sensitivity1.4Vrms
Input Impedance20k Ohms (Balanced)
10 kOhms (Unbalanced)
Gain32.9dB at 1kHz, 8 Ohm Rated Output
Frequency Response(at 1 watt, 20Hz - 20kHz) +0dB, -1dB
Signal-to-Noise RatioXTi1002/2002/4002: 100dB (A weighted)
XTi6002: 103dB (A weighted)
Total Harmonic Distortion (THD)< 0.5%
ConnectionsInput Connectors: XLR, one per channel
Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.
Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
HiQnet USB Connector: Type B, connects to HiQnet network.
Controls Front PanelLevel: Two front-panel rotary level controls, one for each channel
Power Switch: On/Off switch applies AC power to the amplifier
Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
LCD Screen: Backlit liquid crystal display that shows preset and processing status
IndicatorsSignal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip
Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions
Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
CoolingProportional speed fan with front-to-rear airflow.
Power Consumption8.3A; no more than 38W at idle
Power Requirements100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Dimensions19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
Weight18.5 lbs (8.4kg)
SpecialtiesDSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer
Protection for Short Circuits, Overloads, and Overheating
Payment Policy

PayPal is our only method of payment. Your PayPal account must be a Verified PayPal account.

Selecting "Immediate Pay" is the way to go. If you select eCheck, it may take 2-8 days to clear PayPal.

Please include a phone number as UPS and our Trucking Companies require it.

We prefer to ship to a confirmed PayPal address and whether yes or no we may still contact you for additional verification.

For shipments in NY&CA, we are required to collect the appropriate sales tax.

Shipping Policy

Most purchases are shipped within 24-48 Business Hours

Items with "free shipping" are only shipped free to the 48 contiguous United States.

We supply tracking information directly to your eBay account as well as via email within 24 hours after the shipment leaves our warehouse.

Return Policy

Downtown Photo is proud to offer a 30 day return or exchange policy on most items for a full money back refund, excluding any shipping charges (for items which we offer free shipping, our standard shipping charges will be deducted from any refund or credit)

Returned or exchanged products must be in brand-new, mint condition. Items must be in the original, undamaged manufacturer's packaging with all packaging materials, including instruction booklets, packing inserts, and the blank warranty cards. Memory cards and any other Blister Pack items are not returnable once opened. Any merchandise missing the original Universal Product Code (UPC) cannot be returned. The manufacturer's labeled packaging must be enclosed within an additional shipping carton. Please do not place stickers or shipping labels on the original manufacturer's package.

Please be aware that we cannot accept returns on the following items unless they are shown to be defective in manufacture (as decided by the manufacturer):

  • Underwater equipment (once taken underwater
  • Inkjet printers (once ink cartridge/ribbon has been installed)
  • Processing equipment (once used with chemicals)
  • Educational DVDs, Tapes and Books once opened
  • Blister-packed items once opened
  • Original manufacturer software once opened

Please enclose a copy of your invoice with your return and tell us whether you would like the item to be replaced, exchanged, or refunded.

Returns can take up to 5 days in-house from the date we receive it to process. When returning an item, please make sure you use a shipper which provides you with Insurance and a tracking number. Items returned without a tracking number might take much longer to be processed.

left_banner