【Variable Soldering Iron 】HEAT UP fast and works great 60W soldering iron is temperature adjustable from 200℃-450℃ with 5 multiple soldering tips as replacement
【Soldering Iron Support Station】- Standard dual spring soldering iron holder with sponge is a very useful tool when the soldering iron work.It has a secure base and it is more safer than any other thin soldering stand.The maximum extent to avoid the user was burned and damag
【Widely Used & Carry Portable】Soldering iron welding equipment is widely used for welding circuit board, appliance repair, Home DIY hobbyists,jewelry welding.You can take it anywhere and you will be able to find the tools you need in the carry bag

【Look Out】: 1. When the soldering iron is plugged at the first time, there will come out a smoke from the tip end. The smoke will stop in a short while and won't come out again. 2. Use soldering stand and other aids to avoid burnt fingers, and please wet the sponge before using. 3. Don't pull the soldering iron tip outward or use it in that way, which will shorten the service life of the heating elements. 4. Don't use too much solder unnecessarily

Specification
Soldering Iron
EU plug 
Voltage：220V/AC
Power :60W
Temp Range:200°C to 450°C
Temp Adjustable:✔
Color:Blue

Soldering Irons Tips
Standard and easy-to-change.
Free to choose which you need on the welder project.
Strong welding ability
High-quality chrome plating
5 different specifications, easy to use in various working environments

Solder Wire
Weight: About 18g.
Easy to use and carry.
Suitable for repair, rework, and electronics solder.
Our tin wire has good electrical and thermal conductivity, lower melting point, smoother soldering, brighter solder joints, and easier handling
Tips：The temperature needs to reach 300°C to dissolve quickly

Solder Sucker
Lightweight.
High voltage vacuum with strong suction.
Used for sucking melted solder when welder.
We adopt a semi-aluminum design, which is lighter than the previous all-aluminum design, but does not affect our suction power at all.
40% more suction than before, thanks to our stronger springs

Soldering iron stand
The soldering iron stand can effectively protect the iron from being ironed at high temperature or the iron tips dropping on the ground.

Follow The Steps Below To Make Your Welds
1.First of all, make sure that you have all the necessary elements available to carry out your weld.
2.Choose the right tip type.
3.Plug in the iron, set the appropriate temperature, and wait about 30 seconds for the tip to heat.
4.Then check that the parts are clean and not rusted, and clean them if necessary.
5.Then put the parts in contact and apply the hot tip to the contact point.
6.Be careful not to touch the tip or hot parts with bare hands (wear gloves if necessary).

Caution
When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a smoke while and a smoke never comes out again.
Use soldering stand and other aids to avoid bur fingers.
Don't pulled the soldering and other aids to avoid burnt fingers.
After finish the longer life tip face
Don't file the long life tip face and Don't apply too much solder unnecessarily.

Warm Tips
1.Please be really careful when you are using the iron, and keep it somewhere kids can’t reach.
2.Please switch to the 200℃ model when not using the soldering iron. Please do not keep the soldering iron working under high temperature.
3.When welding, do not use too much pressure.
4.To avoid oxidation, please clean soldering iron tip. If there is black oxide on the iron tip, please clean it by wet sponge firstly.
5.Long-time and high-temperature work may shorten its life.
6.Do not leave the soldering iron idle for a long time at the working temperature, it may burn the soldering iron or even other things.

Package Included
1x Temperature Adjust Soldering Iron
1x Tube of Premium Solder 
5x Replaceable Different Soldering Tips
1x Desoldering Pump
1x Curved Tweezers
1x Straight Tweezers
1x Soldering Iron Holder/Sponge