Product Description
Soldering Iron :The soldering iron kit ,it is easy to save energy and ensure safe welding.You just need to turn it off if you don’t want to use it.The insulating silica gel on the iron can effectively protect the iron from being ironed at high temperature or the iron tips dropping on the ground.
Heat up Quickly and Heat Disspation Efficiency:Inner-heated ceramic technology makes the electric soldering iron heat up quickly;Upgraded heat resistant material (not plastic).
Range of Application:Best gift idea for DIY,various repaired usage of electronics and chipboards, jewelry, welding, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories.Excellent Product Experience Soldering iron holder dual safety design.
Complete Function Kit:Comes with PU carrying bag, 220V 60W Adjustable Temperature Welding Soldering iron, 5pcs Solder Tip, Desoldering Pump, Roll of LEAD-FREE Solder Wire (50g）, Soldering Iron Stand, Tweezers, Solder Paste, easy and safe.
Portable Storage and Carry:Which can avoid losing the soldering accessories.The item is great for electric repair,home DIY and other soldering project.

Specification
Soldering Iron
Temperature range:200℃-450℃            
Soldering Iron Length: About 18.5cm            
Cable Length: about 143cm            
Working Voltage: 220V 
Power: 60Watts
Power plug type: EU Plug
Color: Blue

Soldering Irons Tips
Standard and easy-to-change.
Free to choose which you need on the welder project.
Strong welding ability
High-quality chrome plating
5 different specifications, easy to use in various working environments

Solder Wire
Weight: About 50g.
Easy to use and carry.
Suitable for repair, rework, and electronics solder.
Our tin wire has good electrical and thermal conductivity, lower melting point, smoother soldering, brighter solder joints, and easier handling
Tips：The temperature needs to reach 300°C to dissolve quickly

Solder Pump
We adopt a semi-aluminum design, which is lighter than the previous all-aluminum design, but does not affect our suction power at all.
40% more suction than before, thanks to our stronger springs

Pointed Tweezers
The end of the tweezers is welded in the form of laser spot welding, which is more reliable than the previous glue and is not easy to break.
According to market research, we found that curved pointed tweezers are more suitable for welding projects

Soldering Wick
Soldering wick for removing solder in desoldering

Solder Paste
Solder paste can be used as a wetting agent to increase the fluidity of the solder and the efficiency of the soldering process. It also cleans and prevents oxidation of the metal, resulting in a strong, long-lasting mechanical and electrical bond to the solder.
Instructions for use:
Wipe the surface of the object before soldering.
Apply the paste flux to the solder joint.
Solder the tin to the solder joint with soldering iron.

Soldering Stand and Sponge
Comes with a solder stand to support the soldering gun when not in use to prevent high temperature from damage the table. Wet the sponge after using to clean the tip.

Follow The Steps Below To Make Your Welds
1.First of all, make sure that you have all the necessary elements available to carry out your weld.
2.Choose the right tip type.
3.Plug in the iron, set the appropriate temperature, and wait about 30 seconds for the tip to heat.
4.Then check that the parts are clean and not rusted, and clean them if necessary.
5.Then put the parts in contact and apply the hot tip to the contact point.
6.Be careful not to touch the tip or hot parts with bare hands (wear gloves if necessary).

Caution
When the soldering iron is plugged in for the first time, there comes out a smoke from the tip end. The smoke stops in a smoke while and a smoke never comes out again.
Use soldering stand and other aids to avoid bur fingers.
Don't pulled the soldering and other aids to avoid burnt fingers.
After finish the longer life tip face
Don't file the long life tip face and Don't apply too much solder unnecessarily.

Warm Tips
1.Please be really careful when you are using the iron, and keep it somewhere kids can’t reach.
2.Please switch to the 200℃ model when not using the soldering iron. Please do not keep the soldering iron working under high temperature.
3.When welding, do not use too much pressure.
4.To avoid oxidation, please clean soldering iron tip. If there is black oxide on the iron tip, please clean it by wet sponge firstly.
5.Long-time and high-temperature work may shorten its life.
6.Do not leave the soldering iron idle for a long time at the working temperature, it may burn the soldering iron or even other things.

Package Included
1x Temperature Adjust Soldering Iron
1x Roll of LEAD-FREE Solder Wire (50g）
5x Extra Different Soldering Tips
1x Soldering lron Stand with Sponge
1x Desoldering Pump
1x Soldering Flux Paste
1x Solder Wick
1x Tweezers
1x PU carry bag