PurePro 5 micron 10" Spun Polypropylen Sediment Water Filter Cartridge The PurePro 5 micron 10" filter is a 5 micron extra-fine sediment water filter cartridge made of spun bonded-polypropylene. PurePro 5 micron 10" water filters reduce extra-fine dirt, sand, sediment, silt, rust particles, and scale particles. PurePro 5 micron 10" spun fibers form a true gradient density from outer to inner surfaces, filter will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. The PurePro 5 micron 10" water filters can be used on chlorinated or non-chlorinated water supplies. PurePro 5 micron 10" Polypropylene Water Filter Cartridge Specs: Dimensions: 9-7/8" x 2-3/8" (248 mm x 60 mm)Fits all 10" and 9-7/8" housing Micron Rating (Nominal): 5Micron Temperature Rating: max 113°F 45°C Initial P (psi) @ Flow Rate (gpm): 0.2 psi @ 5 gpm (<0.1 bar @ 19 L/min) Pentek P5 Sediment Filter Materials of Construction:Filter Media: Polypropylene FibersPurePro 5 micron 10" Water Filter Reduces: Sediment / Particulate to 5 Micron PurePro 5 micron 10" is Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only. NOTE: Do not use with water that is micro biologically unsafe or of unknown quality without adequate disinfection before or after the system. PurePro 5 micron 10" water filter is the same as the Liff 10" 5 micron, Pentek P5 PS5 5 micron, AquaLogis 10" 5 micron, Kemflo, Ametek P5, Everpure DEV910908 / DEV9109-08 / 910908 / 9109-08, Bunn ED-S-1 / SS-10, Cornelius COR105 / COR120, Cuno CFS110, EcoLab 9320-1135, Manitowoc K-00069 / K-00173, NuCalgon 4712-87, PureMark PFS105, Selecto 101-230, Shurflo SF31-SEDS / F5-052-00
|