Buyer's Note: The regular version does not have a delay function! ! ! !

technical parameter:

Transmitter (remote control)

Remote control transmission frequency 433MHZ (can be customized)

Powered by DC/9V battery

two-button control

The button needs to be pressed for 0.5 seconds before the receiver can receive the correct trigger signal to prevent misoperation

  Receiver (Wireless Controller)

   1. Input voltage: DC9-20V

   2. Control mode: a. Jog mode b. Delay mode

   3. The adjustable range of delay time of two channels is 1-9 seconds

   4. The relay output contact can choose normally open or normally closed, its output power: 250V AC/5A 30V DC/5A;

   5. The remote control receiving frequency band is 433MHZ, which can be customized;

Features:

Jog function

Press and hold the "exposure" button and do not release, and complete the X-ray exposure operation within the set time. When the exposure is over, the buzzer will beep intermittently (every 1S interval). Press the "Reset" button (beep stop) to perform the next exposure operation. Release the "Exposure" key to cancel the exposure operation at any time.

Features: It is suitable for close-range exposure operation, and the X-ray machine exposure operation can be ended at any time.

Applicable to: Siemens vainc, Siemens obric, Siemens compactfl, United Imaging 360370, Siemens C-arm (domestic and imported), Hitachi Mobile DR, Shimadzu Mobile DR, United Imaging Mobile DR, Philips Mobile DR, Agfa Mobile DR, Raycus Mobile DR, Wandong Dingli C-arm, GE C-arm 715, etc...

- Economy: 15-60 days

- Standard: 10-35 days

- Expedited: 4-7 days