2022 Enhanced FOXWELL NT510 Elite Automotive Diagnostic Tools

All In One Car Diagnostic Scanner FOXWELL NT510 Elite fits for Land Rover & Jaguar

FOXWELL NT510 Elite is mainly developed for car owners, enthusiasts, small garages, independent repairs and technicians, which provides OE-level Diagnosis on All the Electronic Systems. It does not only include basic functions such as codes and live data, but also is capable of advanced functions such as actuation and adaptation. In addition, it lets you Access the Most Commonly Required Service Features such as oil service light reset, throttle body adjustment, Diesel-Particulate-Filter regeneration and much more.

1. Works on some latest 2021/2022 models. (More car diagnostic software is being continuously updated)
2. Reads and clears diagnostic trouble codes and resets MIL of all systems.
3. Shows live sensors data and provides data graphing.
4. Merges PID graphs for easy and intuitive diagnosis.
5. Displays freeze frame data.
6. Retrieves ECU information.
7. Runs Component/Active /System Bi-directional Tests.
8. Supports the most commonly required service features like Brake Deactivation Service Reset, Steering Calibration, Diesel-Particulate-Filter Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA(Throttle Body Alignment),ect..
9. Upgradable to cover other car brands through USB cable (60~80 d-ollars for each brand).
10. Multi-language menus and code definitions.
11. Ergonomic design and ruggedly built for both shop and road tests.

 

Full System Diagnostic Bi-directional/Active Test Scan Tool fits for Land Rover and Jaguar

NT510 Elite Multi-System Scanner is the most cost-effective professional scan tool in the industry. It is a unique tool that delivers professional diagnosis for different car brands and supports the most commonly required service features. Bi-directional/active testing is often a very important indicator as to whether an automotive diagnostic is professional grade or not. Most automotive scanners on the market with this feature cost hundreds or even thousands of dollars, the NT510 series can solve almost all car problems, so why spend so much money?

• Full System Diagnostics:

 

1. Body System: SRS Airbag, Instrument Panel, Charging Interface Module, Parking Assistance, Power Control Unit, Lights, Battery Charging System, Roof, Seat and Door Motor System, ABS ESP System, Air Conditioning, etc.
2. Chassis Systems: Steering, Tire Pressure Control, Braking System, Suspension, TPMS, Active Cruise Control, etc.
3. Other Systems: Engine, Transmission, Battery, Diesel Pump, Gear and More.....

 

• Bi-directional/Active tests: Also known as actuator tests, these are bi-directional diagnostic tests of vehicle systems and components. These tests allow you to temporarily activate or control a vehicle system or component with a scanner, and when you exit the test, the system/component returns to normal operation. Some tests display a command to the operator. For example, if "press brake pedal" is displayed, the operator must press and hold the brake pedal and then continue. The order, number and type of tests are determined by the control module. On some systems, the actuator test cannot be restarted until the ignition key has been turned off for a period of time. Alternatively, start and run the engine briefly, shut it down, turn the ignition switch to the run position, and then restart the actuator test.

 

Please Note: The available tests depend on the control module under test and the vehicle itself. These tests will activate a part, but do not check that the part is working properly. Make sure the part to be t-ested is in good condition and properly installed.

FOXWELL NT510 Professional Auto Scanner - Almost All Special Features Are Included

We all know that special functions can perform various component adaptations of the control module under test, allowing you to recalibrate or configure certain components after making repairs or replacement. While most automotive diagnostic scanners do not have or only have a few reset services, some of the advanced vehicle scan tools with reset services are more expensive and few have a cost-effective automotive code reader like NT510 series.

• ABS Bleeding: Allows you to perform a variety of bi-directional tests to check the operating conditions of the anti-lock braking system (ABS). Bleed the brake system to restore ABS braking sensitivity and ensure the safety of the vehicle.

 

What conditions are performed? Replace the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line or brake fluid.

• Oil Reset Service: Allows you to reset the engine oil life system, which calculates the optimal oil life change interval to protect your engine based on your vehicle's driving conditions and climate.
• EPB Reset Service: Helps you maintain your electronic brake system. It supports deactivating and activating the brake control system, assisting in controlling the brake fluid, turning the brake pads on and off, setting the brakes after replacing the brake discs or pads, etc.
• BMS Reset Service: Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
• D-P-F (Diesel Particulate Filter Regeneration): Especially works for Diesel Particulate Filter system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.
• Other Important Reset Services: Fuel Injector Coding, SAS Calibration, TPMS, Throttle Adaptation, AFS Headlamp Reset, Sunroof Reset, Suspension Reset, Gearbox Reset, Gear Learning, A/F Reset, AC Reset, TYPE Reset, Coolant Reset, Windows Reset, Seat Reset, Language Reset, Box Reset, StopStart Reset, etc.