Edelelbrock Cam And Lifter Kit For FORD FE Engines
Part Number 7106
Camshaft Specifications:
Duration @ .050 Intake: 236 degrees
Duration @ .050 Exhaust: 236 degrees
Lift @ Valve Intake: .572
Lift @ Valve Exhaust: .572
Lobe Separation: 108 Degrees
Intake Centerline: 103 Degrees
Idle Vacuum @ 1000 RPM's: 11
Edelbrock Part # 7106 Performer RPM Camshaft is designed for Ford FE 390-428 V-8 applications. This Edelbrock cam kit produced 418 HP & 434 ft-lbs. of torque when used with #7105 intake and #60069 cylinder heads on a 390 engine. The camshaft works well with high-performance street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.
Camshaft can not be used on a 1958-mid 1963 Ford 390 FE engines.
See Our EBAY STORE For Your ENGINE And PERFORMANCE Needs