Brand New, sealed original box, never used, in perfect condition.

Warm Audio product info:

True '47 style capsule

The WA-47 utilizes a custom reproduction of the vintage k47 style capsule that was used in the classic ‘47 microphone - designed with the same hole pattern and frequency response. Every Warm Audio capsule is made in the same small assembly house in a clean-room environment, and packaged in its own protective jewel case until the moment it is loaded into the microphone. Each capsule is visually inspected and electrically tested for imperfections.
A large part of any microphone's tone comes from its capsule, and the true k47 style capsule used in the WA-47 is not easily manufactured or typically found in affordable condenser microphones.  We are proud to be using such a faithful recreation of this classic part in an affordably priced '47 style microphone.

The WA-47 utilizes a custom reproduction of the vintage k47 style capsule that was used in the classic ‘47 microphone - designed with the same hole pattern and frequency response.  Our version of this capsule (model# WA-47-B-80v) is carefully manufactured by an Australian capsule manufacturer who's precision and repeatability allows us to nail the vintage sonics of the most important sonic piece of this classic style of microphone.
the tube

A Slovak Republic JJ 5751 vacuum tube is a lower gain, low noise tube that forces much of the sonics of the capsule and transformer to be heard more significantly than some higher gain tubes might allow.  We auditioned 4 different tube brands and fell in love with the JJ 5751.  The frequency response of the JJ 5751 and the way it contributes to the circuit is tonally smooth and vintage in nature.

The WA-47 utilizes an American made TAB-Funkenwerk (AMI) USA transformer with large core imported German laminations.  This transformer helps provide the creamy smooth top end, and the LARGER THAN LIFE bottom end one would expect from a '47 style condenser microphone.

The WA-47 uses a polystyrene coupling capacitor for uncompressed top-end response from the capsule, wima film capacitors throughout, and an imported Solen French capacitor on its output driving the TAB-Funkenwerk (AMI) USA output transformer.

One component of a tube microphone often overlooked is the 7 pin cable that connects the microphone to its power supply.  When auditioning the WA-47 and other tube microphones we learned quite a bit about 7 pin cables and how the shielding and wire gauge size can drastically change the sonics of a tube microphone.  We have partnered with Gotham Audio in Switzerland to use their very carefully built top-end 7 pin GAC-7 cable. Using this cable increases top end presence and the overall size of the recorded image in the stereo field, by reducing phase shift and the parasitic effect often found in poorly built cables. Gotham Audio is very expensive and boutique in nature and should not be considered a small addition to the WA-47 package.

    Custom true '47 capsule reproduction (k47 style) - Model# WA-47-B-80v

    Capsule makeup: Gold sputtered, dual large diaphragm, single backplate, 6 microns NOS mylar (PET film)

    TAB-Funkenwerk (AMI) USA output transformer

    JJ Slovak 5751 vacuum tube

    Gotham 5 meter GAC-7, 7-pin tube microphone cable

    Wima, Solen French, and Polystyrene capacitors

    Self-noise: 11dBA

    Polar Patterns: 9 patterns - Cardioid, Omni, figure-of-eight + 6 mixed patterns

    Dynamic range: 130dBA

    Maximum SPL: 140dB (<0.5% THD)

    Frequency Range: 20 Hz~20 kHz

    Output Impedance: 200 ohms

    Rated Load Impedance: ≥2kOhms

    S/N Ratio: 82dBA

    Equivalent Noise: 10dBA (IEC651)

    External IEC grounded PSU

    Total Weight - 9 lbs

    Mic Diameter: 60mm

    Mic Length: 254mm

    Includes: Microphone, Wood box, Power Supply Unit, Shockmount, Gotham 7 pin GAC-7 cable, IEC power cable