Type A Doorbell Intercom Camera
Specification:
Product color: Gray/silver
Wide Angle: 166 degrees
Power supply: 18650 battery [not included]
Power supply voltage: 5 (V)
Ringtone: Phone prompt plus jingle prompt
Type: Wireless visual intercom
Power consumption: 20 (W)
TF card: Support 8G / 16G /32G
Mobile monitoring: Supported
Infrared effective distance: 10 meters
Recording device: SD card to record the former (20)
Wireless network: IEEE 802 11 b/ g/ n
Doorbell product size: about 14.4*7.5*3.3cm
Fetures:
one-button start
It's not only the doorbell, but also the monitoring. Turn on the phone to check the status of the door at any time.
4G all glass lens 155°
Double vision, outside the door/courtyard/corridor/aisle
Motion Detection
When someone stays in front of the house for a long time, it will automatically alarm the phone
The doorbell camera comes with PIR human body detection technology, combined with infrared night vision and wide-angle lens, to achieve fast capture,
Bad guys staying overtime within 1-2 meters of the door can be sent to your mobile phone in time.
Short Recording video
The mobile APP is bound to the product, through the Wifi wireless network, the APP starts the notification function, and there are other abnormal situations of visitors and goods
Take a picture and notify the APP client at any time, you can check the situation at any time, and you can know the situation in front of your house even when you go to work.
8 months long standby
No wiring required, simple installation, ultra-low power consumption technology, effective standby for 8 months, convenient and environmentally friendly.
Smart WiFi configuration
Long-distance signal transmission
Guests can make voice calls and video recording for a short time when visiting guests. The owner can know the information of the visitor without opening the door.
You can connect multiple users without WiFi and watch online at the same time.
50M strong penetration ability
No longer worry about not receiving the signal, no soun
Package includes:
The doorbell * 1
Jingle * 1
Description * 1
Type B Doorbell Intercom Camera
Fetures:
Wireless connection, ultra-low power consumption, can support multiple accounts to watch online at the same time
APP access doorbell rules: 1 main account + 8 shared accounts = 9 users can connect to the doorbell, only 3 users can preview the screen at the same time at a time, and only one user can talk to the doorbell at a time
Uses: Guests can make video and voice calls and make short-term video recordings, and the host can know the visitor's information without opening the door.
Listings
1 * visual doorbell,
1 * dingdong machine
1 * manual
Product Parameters
Main control (CPU): XR872AT
Memory: 32Mb flash
Sensor (sensor): 30W GC0328 CMOS sensor
Lens: 120° wide-angle lens
Sensor performance: support automatic white balance, automatic gain control, automatic backlight compensation
Signal-to-noise ratio: ≥41dB
Minimum illumination: 0.8Lux/F1.4 (color mode), 0.3Lux/F1.4 (black and white mode)
Night vision: 2pcs 850nmΦ28Mil high power infrared light
Night vision distance: 1 meter is the best, the longest distance is 3 meters
Video format: JPG
Video size/frame rate: 30W/7fps
Recording method: 1. Press button to trigger recording;
Cloud Storage Map: 30 seconds (5 images)
Battery Type/Capacity: Polymer 803035/800MAH
Battery discharge time: polymer battery sleep standby for 1 year
Network Protocol: TCP/IP/HTTP/TCP/UDP/DHCP/DNS/DDNS/NTP/RTP/P2P
WIFI connection: 2.4GHz wifi, support (802.11 b/g/n)
Ding Dong: Support RF 433MHZ Ding Dong
Storage: Support cloud storage function (hardware without TF card function) 3 days free circulating cloud storage
Working voltage: polymer 803035/3.7V
Working current: working current 219mA, deep sleep current 10WA, open infrared working current 280mA
USB charging voltage: DC 5V / 1.5A
Storage temperature (℃): (0℃~50℃)
Operating temperature (℃): Working temperature: -10~50℃, working humidity <95%
Installation method:
1. First scan the QR code of the instruction manual and download the APP
2. Download the APP and click to register according to the steps
3. After registration, click "+" to add device
4. Add WIFI, add WIFI password
5. After the setting is successful, click on the QR code, scan it with the doorbell camera, the distance is about 10cm, wait for the addition to be successful, there will be a sound, click OK
6. Set the doorbell to the door or office door that can share WIFI
7. Insert the jingle into the USB port and you can