3D Printed headshell for Lenco GL75
DIY carbon fibre tonearm upgrade. 

Update 16 Oct 2023.
The finger lift has now been removed as it proved to be a little fragile and I have
added a metal finger lift instead. 
==============
This 3d printed headshell is *primarily* aimed at folk who want to make their own
carbon fibre tonearm for the Lenco GL75 turntables (perhaps plus other arms).
Designed by M.A and printed exclusively for Tangram Tables by R.S. this is a 3d print,
with a clamp on end designed to fit on an 8mm CF tube. The clamp screwhole is for
a M2.5, or you can drill it out for M3. (You would need to swap the knife edge from
an original arm to the CF tube to make this style of arm.)
Just make sure you don't overtighten the clamp screw !

The last photo is of one of my own CF tube arm wands and is not included
in this sale. I’m happy to provide further help with a CF mod after the sale.

In case you cannot read the details on the underside of the headshell
it says "G8INA Made In England" :) 
================================
See my other items : Items for sale by g8ina2 | eBay
NB : This is not my full time job, it's a hobby, I don't do fancy
packaging, I don't do shiny finishes, what you see is what you get :)
Located NN3 Northampton, UK
=============================
Happy to answer any questions, I have 100% pos feedback on over 4140 trades and
I intend to keep it that way !! Happy to post overseas using ebay’s own GSP system.
Check my feedback for packaging quality :)
I will only post on Mondays & Thursdays.
Thank you for your patience !
===========================