Up for sale  inexpensive  mini itx board combo:
                                         GIGABYTE-GA 847N
    Model of 2011 approx,support various connection options
TDP-17w approx,comes fan.Support various connections,etc...
Equippped with Intel Celeron 847cpu ,2 cores(thanks to good architecture 2 cores are more effective than atom with 4 cores!)
Comes with 8 gb ram(2 x 4) Kingston modules with heatspreaders!


Can be used as small home FTP server,etc...
    INFO and manual:
gigabyte.com/Motherboard/GA-C847N-rev-10#ov
  • CPU
    1. Built in with an Intel® Dual-core Celeron® 847 processor (1.1 GHz)
      * Do not disassemble the onboard CPU/Chipset and the heatsinks/fan by yourself to avoid damage to these components.
    2. 2 MB L3 cache
  • Chipset
    1. Intel® NM70 Chipset
  • Memory
    1. 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
      * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
    2. Dual channel memory architecture
    3. Support for DDR3 1333/1066 MHz memory modules
    (Please refer "Memory Support List" for more information.)
  • Onboard Graphics
    Integrated Graphics Processor:
    1. 1 x D-Sub port
    2. 1 x HDMI port, supporting a maximum resolution of 1920x1200
  • Audio
    1. Realtek ALC887 codec
    2. High Definition Audio
    3. 2/4/5.1/7.1-channel
      * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
  • LAN
    1. 2 x Realtek GbE LAN chips (10/100/1000 Mbit)
  • Expansion Slots
    1. 1 x PCI slot
  • Storage Interface
    Chipset:
    1. 1 x SATA 6Gb/s connector (SATA3 0) supporting up to 1 SATA 6Gb/s device
    2. 2 x SATA 3Gb/s connectors (SATA2 1/2) supporting up to 2 SATA 3Gb/s devices
    3. 1 x eSATA 3Gb/s connector on the back panel supporting up to 1 SATA 3Gb/s device
    JMicron JMB368 chip:
    1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
  • USB
    Chipset
    1. Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
  • Internal I/O Connectors
    1. 1 x 24-pin ATX main power connector
    2. 1 x 4-pin ATX 12V power connector
    3. 1 x IDE connector
    4. 1 x SATA 6Gb/s connector
    5. 2 x SATA 3Gb/s connectors
    6. 1 x CPU fan header
    7. 1 x system fan header
    8. 1 x front panel header
    9. 1 x front panel audio header
    10. 2 x USB 2.0/1.1 headers
    11. 1 x parallel port
    12. 1 x serial port header
    13. 1 x Clear CMOS jumper
    14. 1 x chassis intrusion header
  • Back Panel Connectors
    1. 1 x PS/2 keyboard port
    2. 1 x PS/2 mouse port
    3. 1 x D-Sub port
    4. 1 x COM port
    5. 1 x HDMI port
    6. 4 x USB 2.0/1.1 ports
    7. 1 x eSATA 3Gb/s connector
    8. 2 x RJ-45 ports
    9. 3 x audio jacks (Line In/Line Out/Microphone)
  • I/O Controller
    1. iTE I/O Controller Chip
  • H/W Monitoring
    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System fan speed detection
    4. System fan speed control
      * Whether the system fan speed control function is supported will depend on the system cooler you install.
  • BIOS
    1. 2 x 32 Mbit flash
    2. Use of licensed AMI EFI BIOS
    3. Support for DualBIOS™
    4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
  • Unique Features
    1. Support for @BIOS
    2. Support for Q-Flash
    3. Support for Xpress Install
    4. Support for Xpress Recovery 2
    5. Support for EasyTune 6
      * Available functions in EasyTune 6 may differ by motherboard model.
    6. Support for Smart Recovery 2
    7. Support for Auto Green
    8. Support for ON/OFF Charge


Customs fees and  any compatibility issues on buyers responsibility!Ships from Latvia,to EU no fees.
  • Sale are final and  AS/IS!
  • Also please look at my other items!