12V VACUUM PUMP ‘GOLD’ KIT
COMPRISING OF THE FOLLOWING PARTS:
Hella UP 5.0 Vacuum Pump
8TG012.377-701
This is the largest vacuum pump
produced by Hella.
It was designed for the Aston Martin
DB11 but is now available in universal form.
This pump is quieter than the UP32
measuring only 73db
Operating voltage between 10V -16V
Maximum vacuum 90% below ambient
(UP32 = 86%)
Pressure build up time
50% of ambient pressure in ≤ 2.4 sec
70% of ambient pressure in ≤ 4.4 sec
Ambient pressure 13V Test volume 4L
Average Current draw < 15 Amps
Pump operating time ≥ 1500 hours
THIS IS A GENUINE HELLA VACUUM PUMP
BOUGHT DIRECTLY FROM HELLA UK - NOT CHINA!
Hella UP 5.0 electrical connector
2 way high current plug to complete a
professional installation
Adjustable Vacuum Switch
Normally Closed
Adjustable between -200 to -900 mbar
Max switched voltage 48V
Max switched current 0.5A
1/4 BSPT thread
15/16 Spanner size
2 X Spade terminals
Turning the adjuster screw anti
clockwise increases vacuum
Adjustable Vacuum Switch Rubber Boot
Use this rubber boot to protect the
vacuum switch
from water & dust ingress
HELLA VACUUM PUMP BRACKET - NEW
DESIGN
304 Stainless Steel brackets allow
the pump to be base mounted or vertically mounted.
Nuts & bolts are provided for
both mounting options.
An M5 stud is provided for mounting a
micro relay base.
2 x M6 bolts with Nyloc nuts for
mounting the pump
The bracket has 4 x 8mm dia mounting
holes
All fasteners are made from stainless
steel
ALUMINIUM TEE PIECE
This is for mounting the vacuum
switch in your vacuum system
1 x ¼ BSPT thread (vacuum switch)
2 x M12x1.5 threads for hose tails
2 x 10mm hose tails
OTHER HOSE TAIL SIZES ARE AVAILABLE
IF YOU REQUIRE 8MM OR 6MM HOSE TAILS
PLEASE INCLUDE A MESSAGE AT THE CHECKOUT
2 x M5 bolts with nuts to allow
mounting of the tee piece
We recommend using some form of
thread sealant on these connections
12V MICRO RELAY WITH DIODE & BASE
Diode protects circuits from back EMF
Relay current rating 25 Amps
Micro relay Base
Terminals
M5 Nyloc nut & washer for
mounting on Vacuum pump bracket
20 AMP CIRCUIT BREAKER
The thermal circuit breaker provides
protection for the pump
DIMENSIONS
Height - 145mm
Width – 126MM
Depth - 122mm
PLEASE SEE THE PICTURE FOR BASIC DIMENSIONS
BASIC PLUMBING AND
WIRING INSTRUCTIONS ARE ALSO INCLUDED.
*NON RETURN VALVE NOT INCLUDED*
THIS LISTING PRICE INCLUDES UK
VAT@20%
WARNING
The pump should never be running
continuously.
IT IS THE RESPONSIBILITY OF THE PERSON INSTALLING
ANY BRAKE COMPONENT OR KIT TO DETERMINE THE SUITABILITY OF THE COMPONENT OR KIT
FOR THAT PARTICULAR APPLICATION. IF YOU ARE NOT SURE HOW TO SAFELY USE THIS
BRAKE COMPONENT OR KIT, YOU SHOULD NOT INSTALL OR USE IT. DO NOT ASSUME
ANYTHING. IMPROPERLY INSTALLED OR MAINTAINED BRAKES ARE DANGEROUS. IF YOU ARE
NOT SURE, GET HELP OR RETURN THE PRODUCT. YOU MAY OBTAIN ADDITIONAL INFORMATION
AND TECHNICAL SUPPORT BY CALLING TAYLOR AUTOMOTIVE AT 01825 873578, OR EMAIL US
AT GEOFF@TAYLOR-AUTOMOTIVE.CO.UK. USE OF TAYLOR AUTOMOTIVE TECHNICAL SUPPORT
DOES NOT GUARANTEE PROPER INSTALLATION. YOU, OR THE PERSON WHO DOES THE INSTALLATION
MUST KNOW HOW TO PROPERLY USE THIS PRODUCT. IT IS NOT POSSIBLE OVER THE PHONE
TO UNDERSTAND OR FORESEE ALL THE ISSUES THAT MIGHT ARISE IN YOUR INSTALLATION.
RACING EQUIPMENT AND BRAKES MUST BE MAINTAINED AND SHOULD BE CHECKED REGULARLY
FOR FATIGUE, DAMAGE, AND WEAR