Creative Labs Video Blaster (CT6000) 16-bit ISA Video Card

Description

Vintage Video Blaster CT6000. Comes as shown, no box, software, etc.

Video Blaster is a video adapter for IBM 386 PCs and higher compatibles which converts a standard full-motion video image (composite video source) into a format for display on a computer graphics monitor. It can position and scale the video image onto the output display and allows the video image to be merged with computer graphics for interactive multimedia applicaiton. Video Blaster supports both NTSC and PAL system. It has to work with standard VGA card that incorporates a feature connector. It accepts composite video, caters 3 video input sources (video 0, 1, 2). This card has a constraint of system RAM must not be more than 15 MB.

System Requirements

IBM PC-AT and higher compatibles

Not more than 15 MB of system RAM

16-bit ISA expansion slot

VGA card with standard VESA compliant feature connector

MS DOS 3.1 or PC DOS version 3.1 or later

VGA or multisync monitor running at 50-70 Hz with horizontal scanning rate of about 31.5 KHz

Windows 3.1 or higher installed (NOTE: There are no Windows 95 or higher drivers)

MS Video For Windows 1.0 and above

Hardware Specifications

Supply Voltage Requirement (Loading): +5, +12, -12 Volt

Current Consumption (Typical.): 1, 0.28, 0.104 A respectively

Clocks Frequency: 50 MHz and 26.8 MHz

Video Signal Input Level:

Composite video signal: 1.0 Vpp @ 75-Ohm load

Video Signal Output Level: RGB 0.6 Vp-p (typical)

Hardware Settings

Default settings shown in [brackets]

Interrupt (IRQ) (s/w programmable): 5, [10], 11, 12

I/O Address (s/w programmable): 2A90, [2AD6], 2AF0 Hex

Frame Buffer Base Address (s/w programmable): 9 - 15 MB (14 default)

Connectors

VGA/Video In Connector - 15 pin D-shell female connector

Monitor Out Connector - 15 pin D-shell female connector

VGA Feature Connector - 24 way double row straight header

Mono jack for microphone input

Female RCA jacks for line input

Stereo jack speaker output

Listing and Shipping

Actual item in photos, except in the case of a multiple item listing where all items are the same. For some new and in box/packaged items, I may include a manufacturer or retail stock picture.
Items may be shipped via Canada Post, UPS, FedEx or Purolator depending on your location. If you have a preference on which carrier I use please let me know at the time of purchase and I will do my best to accommodate.
Will combine shipping when and where appropriate.
Vintage and used items are described as accurately as possible and are sold as is, with no warrantee. Please ask any questions you have before bidding or buying.