●Power consumption: 70

●Set temperature (°C): 200 ~ 480

●< Body Specifications >

●Power: 100 VAC 50/60 Hz

●Power consumption: 70

●Plug Shape: Two-Pole Grounded Plug

●Temperature range (°C): 200 ~ 480

●Ripple temperature: +/- 1 °C without load

●< Station Specifications >

●Output: 26

●Dimensions (mm): 100 (W) x 120 (H) x 120 (D)

●Weight (kg): 1.2

●< Metal Part Specifications >

●Power consumption (W): 65 (26 V)

●Corrugated earth-to-ground resistance: < 2 Ω

●Leak voltage: < 2 mV

●Standard Tip: Type B (No. T 18 - B)

●heaters: ceramic heaters

●Cord length (m): 1.2

●Total length (mm): 217 (with trowel tip B)

●Weight (g): 46 (with a trowel tip B)

●Color: Silver

●The digital type is now available in the analog price range.

●Features adjust mode, preset mode, and password mode.

●Metal tip and heater separation type with excellent cost performance.

●With strict quality control, the temperature adjustment, which is essential, can be easily adjusted in the adjust mode.

●If you use the adjust mode, you can quickly complete this task by simply inputting the measured value of the trowel temperature into the calculator.

●A trowel table of the same color is set according to the design of the station.

●A feature-rich platform not only improves workability, but also provides a visually unified working environment.

●Diverse applications (optional)

●1. N2 Soldering Iron: By blowing out the nitrogen gas heated inside the iron trowel from the tip of the iron trowel, the solderability is improved by preventing preheating and oxidation of the soldering part.

●2. Manual one-handed solder feed trowel: Since solder feed and soldering can be done simultaneously with only one hand, it is also possible to work while pressing parts with the other hand.

●3. SMD Hot Tweezer: This hot tweeter is convenient for removing chips and SOPs. Since it is a direct heat system, it can minimize the impact on the heat-sensitive components in the vicinity than the hot air system.

●Set: Body (w/Cord), Metal Stand (Cleaning sponge with cleaning wire), Metal Part (FX -8801)

*Total length and weight exclude cords.