5CM 12V Foam Cutting Pen, Electric Hot Foam Cutter Machine Pen, Blue
The foam cutting pen can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for hand-made foam, small craft model making, advertising font production, DIY hand model making, etc.
Specification
Color: Blue
Material: Metal, Stainless Steel
Voltage: 12V
Power: 30W
DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch
Metal Pen Length: 5CM / 1.97 Inch
Total Length: 20CM /7.87 Inch
Packing List: 1 x Foam Cutting Pen (Power Adapter is NOT Included.)
Advantage
The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds.
Non-slip Insulating Rubber Handle: The lightweight heating pen with a non-slip rubber handle will let you not be tired after a long time of cutting work.
The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. Suitable for cutting medium and low-density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc.
Instruction
Step1. Connect and switch on the power adapter.
Step2. Turn the switch on and wait for the temperature to rise to usage temperature.
Step3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut.
Step4. After cutting, turn off the switch and wait for the foam cutter to cool down.
Recommended to rest for more than half an hour after 30 minutes of use.
NOTE: 1. Please use it with a power adapter and pay attention to the DC plug size before ordering.
2. The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.
Specification
Color: Blue
Material: Metal, Stainless Steel
Voltage: 12V
Power: 30W
DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch
Metal Pen Length: 5CM / 1.97 Inch
Total Length: 20CM /7.87 Inch
Packing List: 1 x Foam Cutting Pen (Power Adapter is NOT Included.)
Advantage
The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds.
Non-slip Insulating Rubber Handle: The lightweight heating pen with a non-slip rubber handle will let you not be tired after a long time of cutting work.
The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. Suitable for cutting medium and low-density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc.
Instruction
Step1. Connect and switch on the power adapter.
Step2. Turn the switch on and wait for the temperature to rise to usage temperature.
Step3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut.
Step4. After cutting, turn off the switch and wait for the foam cutter to cool down.
Recommended to rest for more than half an hour after 30 minutes of use.
NOTE: 1. Please use it with a power adapter and pay attention to the DC plug size before ordering.
2. The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
5CM 12V Foam Cutting Pen, Electric Hot Foam Cutter Machine Pen, Blue
The foam cutting pen can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for hand-made foam, small craft model making, advertising font production, DIY hand model making, etc.
Specification
Color: Blue
Material: Metal, Stainless Steel
Voltage: 12V
Power: 30W
DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch
Metal Pen Length: 5CM / 1.97 Inch
Total Length: 20CM /7.87 Inch
Packing List: 1 x Foam Cutting Pen (Power Adapter is NOT Included.)
Advantage
The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds.
Non-slip Insulating Rubber Handle: The lightweight heating pen with a non-slip rubber handle will let you not be tired after a long time of cutting work.
The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. Suitable for cutting medium and low-density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc.
Instruction
Step1. Connect and switch on the power adapter.
Step2. Turn the switch on and wait for the temperature to rise to usage temperature.
Step3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut.
Step4. After cutting, turn off the switch and wait for the foam cutter to cool down.
Recommended to rest for more than half an hour after 30 minutes of use.
NOTE: 1. Please use it with a power adapter and pay attention to the DC plug size before ordering.
2. The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.
Specification
Color: Blue
Material: Metal, Stainless Steel
Voltage: 12V
Power: 30W
DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch
Metal Pen Length: 5CM / 1.97 Inch
Total Length: 20CM /7.87 Inch
Packing List: 1 x Foam Cutting Pen (Power Adapter is NOT Included.)
Advantage
The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds.
Non-slip Insulating Rubber Handle: The lightweight heating pen with a non-slip rubber handle will let you not be tired after a long time of cutting work.
The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. Suitable for cutting medium and low-density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc.
Instruction
Step1. Connect and switch on the power adapter.
Step2. Turn the switch on and wait for the temperature to rise to usage temperature.
Step3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut.
Step4. After cutting, turn off the switch and wait for the foam cutter to cool down.
Recommended to rest for more than half an hour after 30 minutes of use.
NOTE: 1. Please use it with a power adapter and pay attention to the DC plug size before ordering.
2. The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.