10259B Engine Actuator Compressor Assembly Tool 10259A For Fiat MultiAir 12-19
Features

10259B Variable Valve Actuator Assembly Removal MultiAir Spring Compressor

10259B Engine Actuator Compressor Assembly Tool

For Fiat MultiAir Engine 2012-2019 1.4L 16V/Turbo/2.4L/BF/FB/FF/PF/UF/VM

2012 (FF) Systems (9 - Engine, 1.4L I4 Multiair 16V)
2013 (FF, PF) Systems (9 - Engine, 1.4L I4 16V Turbo, 9 - Engine, 1.4L I4 Multiair 16V, 9 - Engine, 2.4L Multiair)
2015 (BF, FB, FF, PF, UF, VM) Systems (9 - Engine, 1.4L I4 16V Turbo, Engine, 2.4L Multiair, Engine, 1.4L I4 Multiair 16V)
2016 (BF, FB, FF, UF, VM) Systems (9 - Engine, 1.4L I4 16V Turbo, Engine, 2.4L Multiair, Engine, 1.4L I4 Multiair 16V)
2017 (BA, BF, BQ, BU, FB, FF, GA, K4, KL, M1, M4, MP, PF, UF, VM) - Systems (9 - Engine, 1.4L I4 16V Turbo, Engine, 2.4L Multiair, Engine, 1.4L I4 Multiair 16V, Engine, 2.0L)
2018 (BA, BG, BU, FB, FF, GA, GU, KL, M1, M4, M6, MP, VM) - Systems (9 - Engine, 1.4L I4 16V Turbo, Engine, 2.4L Multiair, Engine, 2.0L)
2019 (BA, BG, BV, FD, FF, GA, GU, KL, M1, M4, M6, MP, VM) - Systems (9 - Engine, 1.4L I4 16V Turbo, Engine, 1.3L I4 16V MultiAir Turbo, Engine, 2.4L Multiair, Engine, 2.0L)

Prepare the 10259A/B Spring Compressor tool for installation on the VVAA:

Fiat MultiAir Spring Compressor

How to Remove Engine Actuator Compressor ?

Remove Engine Actuator Compressor

Step 1

  • Disconnect the oil temperature sensor, and release the connectors for the actual valve body actuators.
Remove Engine Actuator Compressor

Step 2

  • Install the 10259B Tool with the tool's four bolts tightened to 9 N-m (80 in. lbs.).
Remove Engine Actuator Compressor

Step 3

  • Rotate the spring compressors until fully seated. Remove the nine bolts.
Remove Engine Actuator Compressor

Step 4

  • Remove the variable valve timing actuation assembly, with the spring compressor attached, from the camshaft bearing housing.

How to Install Engine Actuator Compressor ?

Install Engine Actuator Compressor

Step 1

  • Install a new VVAA gasket (1).
Install Engine Actuator Compressor

Step 2

  • Rotate the spring compressors until fully seated. Apply little white petroleum jelly to the plug tip. Set the Assembly into position.
Engine Actuator Compressor

Step 3

  • Visually inspect the alignment of the plugers.
Install Engine Actuator Compressor

Step 4

  • Reinstall all the bolts.
10259B / 10259A

Direct Replacement for 10259B / 10259A.

10259B / 10259A

Rotate the spring compressors(1)until fully seated