1 pair
ATC100S
from AXTON's ATC series
very high efficiency of 86dB! at 1 watt
to work properly on normal factory radios
to be able to play dynamically and loudly.
This speaker series also stands out
through particularly easy installation.
Axton does not use an external crossover here
always with increased assembly effort and additional
Cable laying is connected.
Instead, the coil for the bass/midrange driver is direct
attached to the basket.
For the separation of the tweeter is a very high quality
Capacitor in the connecting cable to the tweeter
appropriate.
So you don't have to lay extra cables, you can
the speakers directly against factory 2-way systems
swap and simply replace them with the ones in the car
Connect the speaker cable directly.
In addition, the bass speaker only has an installation depth of 39mm
Can be accommodated in almost Allen speaker openings.
General description:
for an excellent sound and quality level in the middle
price segment.
The new ATC100S is a stable and powerful sound
Component system.
equipped with component quality in this price range
sets standards.
By using high-quality capacitors for the
Tweeter is also at higher listening volumes
In addition, this can be optimally adjusted in 2 volume settings
the installation position in the vehicle can be adjusted.
It impresses with a sensationally linear frequency response.
Due to its clever construction and the included
It is mounting material both in the factory opening and
universally installable.
- Music load capacity: 100 W
- Rated power rating (RMS): 60 W
- Efficiency (1W/1m): 86dB
- Frequency response (-3 dB): 90 Hz - 25 kHz
- Impedance: 4 ohms
- Installation diameter: 93 mm
- Installation depth: 39 mm
- precision-made sheet steel basket (Euro-DIN)
- powerful srontium ferrite magnet
- Low-resonance polypropylene membrane
- linear working surround made of NBR nitrile rubber
- rear-ventilated Nomex centering spider
- Voice coil on polymide carrier
- hard gold-plated, corrosion-resistant plug contacts
- 25 mm tweeter with fabric dome
- Powerful neodymium magnet with ferrofluid cooling
- Mounting adapter for flat, recessed or angled mounting
- Can be removed from the housing to better fit into the original
to be installed in the vehicle's installation locations
- Level reduction for the tweeter -3 dB or 0 dB
- 2 pieces bass/midrange speakers
- 2 tweeters
- 2 crossovers (integrated)
- 2 tweeter housings for flat mounting
- 2 tweeter housings for inclined mounting