2023 Enhanced AUTOPHIX 5600 OBD2 Scanner Tools for Audi TPMS Engine ABS SAS EPB Battery Registration Full System Car Diagnostic Tool for VW

AUTOPHIX 5600 has been upgraded on the basis of 200,000+ cars real fault diagnosis. As a professional car scanner, it can read and clear trouble codes of all major systems, such as ECM, ABS, SRS, TCM, Adaptive Cruise Control, All Wheel Control, Immobilizer, Steering Column Locking, Ride Control System, Navigation, Air Conditioning, Interior Monitoring, Headlight Regulation, BMS, etc. Besides, it can diagnose all car brands's engine system.

Powerful & Advanced Features

AUTOPHIX 5600 scan tool is compatible with all VW/AUDI/SKODA/SEAT vehicles' powertrain/ suspension/ body/ electrical module, and can perform 10 powerful and special functions, including Service/ Oil Reset, EPB Reset, Tire Pressure Reset, BAT Check, Throttle Learn, BMS Reset, Battery Registration, EPB Replace Brake Pads, ETCS Reset. What's more, we set shortcut keys for 5 commonly-used functions in the main interface, so you can quickly use these functions.

AUTOPHIX 5600 Powerful Maintenance Functions

Oil Light/Service Reset:Allows you to reset the service lamps on the instrument cluster;

Battery Register/Battery Maintenance: Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc;

Electronic Parking Brake (EPB) Service Reset: Allows you to perform service and maintenance, including deactivation and activation of brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on where electronic brake systems are fitted. Diagnoses EPB caliper functionality, initializes the wear indicator if new pads installed and deactivates or re-activates brake control system.

Electronic Throttle Position Reset/Learn: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;

Tire Pressure Monitoring System (TPMS) Reset:Allows you to check the tire sensor IDs from the vehicle and to perform TPMS programming and reset after tires sensors are replaced or rotated;

ETCS Reset: Reset learned value of Intake valve, when updating specific components, these parameters inside should be reset or configured.

BAT Check, BMS Reset.

Why Choose the AUTOPHIX 5600 Full System Diagnostic Scanner ?

1.Full OBDII functions : Read Fault Codes, Erase Fault Codes, Read Datastream, Vehicle Information, EVAP test , Version Information.

2.Engine System: Engine device that provides power for the automobile and the heart of the automobile. 5600 OBD2 scanner Support OBD2 cars from 1996 to now. It can support all modes OBDII functions & battery Voltage. Easily identify car problems and determine the cause of check engine light on. Help you pass the e-xhaust test and keep your car in the best condition.

3.Injector System : Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;

4.Auto Transmission System: When the transmission fault light appears on your dashboard, 5600 transmission scanner allows you to read and display the parameters on the transmission system, such as transmission temperature, brake pressure, tachometer drive shaft, etc. To read and clear the faulty codes, and keep vehicles running smoothly.

5.ABS System: ABS automatically control the braking force of the brake when the car is braking, so that the wheels are not locked and in the state of edge rolling slip (slip rate is about 20%) to ensure the maximum adhesion between wheels and ground.

6.SAS System: Allows you to perform c-alibration of the steering angle sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. After c-alibrate sensor successfully, its fault memory will be automatically cleared.

7.TPMS System: Allows you to check the tire sensor IDs from the vehicle and to perform TPMS programming and reset after tires sensors are replaced or rotated.

8.Battery Matching System: Allows the scan tool to evaluate the battery charge level, monitor the short circuit current, register the battery change, activate the vehicle hibernation mode and charge the battery via the diagnostic socket.

9.A/C (Air Conditioner) System: Supports routine maintenance of air condition modules, such as air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.

More.......

EVAP System Test

Lets you initiate a leak test for the vehicle's EVAP system. The OBD2 scanner does notperform the leak test, but signals to the vehicle's on-board computer to initiate the test.

Battery Registration

Help you register the battery which has the same capacity and type as the original one, adapt the new battery to ECU to work properly.

step 1.Replace a Battery
step 2.Locate OBD-II port
step 3.Turn Ignition On
step 4.Complete the Battery, Registration Procedure

OBD2 Module Function (For All 12V OBDII 16 Pin Vehicles)

1. Works on latest 2020 models. (More V.A.G car diagnostic software is being continuously updated)

2. Reads and clears diagnostic trouble codes and resets MIL of all systems.

3. Easy to update 5600 scanner through USB cable

4. Ergonomic design and ruggedly built for both shop and road tests.

5. I/M Readiness function is used to check the operations of the Emission System on OBD II compliant vehicles.

6. Data stream allows viewing of live or real time PID data of vehicle’s computer module(s).

7. Vehicle Enables retrieval of Vehicle Identification No.(VIN), Calibration ID Nos. ((CINs), Calibration Verification No. (CVNs) and In-use Performance Tracking on 2000 and newer vehicles

8. Supports the most commonly required systems features like brake deactivation, service reset, steering calibration, TPMS,ect.

AUTOPHIX 5600 Can Change The Languages

Denish,Dutch,English,Finnish,French,German,ITALIAN,Norwegian,Portuguese,Russian,Spanish,Swedish

Car Support List:

Fit for Volkswagen car series :(before 2019)
Fit for Audi car series :(before 2019)
Fit for Skoda car series :(before 2019)
Fit for SEAT car series (before 2019) :
Fit for Volkswagen commercial vehicle and truck Series: Caddy before2018/ Caddy Pickup -2002/ Transporter 2003-2018/ Amarok 2010-2018/ Multivan 2003-2009/ TGE 2017-2018
Fit for BENTLEY： Continental 2004-2019/ New Continental GT 2012-2018/ Continental Supersports 2012-2018/ Continental Supersports Convertible 2012-2018 / Continental Flying Spur 2012-2019/ Continental Flying Spur Speed 2012-2019 / Bentayga 2016-2019/ Mulsanne 2011-2019 / Brooklands 2009-2010 / Azure 2000-2010
Fit for LAMBORGHINI: URUS 2018-2019/ Gallardo 2008-2014 ,Gallardo NF / Huracan 2014-2018 Aventador 2012-2018
BUGATTI: Veyron 2001-2016/ Chiron 2017-2022

Lifetime Free Update ✚ Print Diagnostic Report

With this obd2 scanner, you can enjoy life-time free software update to stay current with newly added parameters, newest vehicles and functions. The scanner tool generates a diagnostic report, so you can print it to your mechanic. Once connect with car OBD2 port, it will automatically detect car number, so you can find the assembly drawing of auto parts on the website. More professional and convenient.