LIMITED QUANTITY SPECIAL PRICE OFFER
 
 

If you are making jewelry or working in glass, wood, metal, or stone, you need this great set! Thirty pieces, all different shapes and sizes.

Photo is enlarged to show detail (computer setting vary, therefore images may vary also. Use coin [18mm] as a guide.)

This transaction is for thirty (30) various shaped, diamond tipped drill bits and shaped tips, 600 grit (fine). 1/8" shank diameter. Fine grit for sanding, grinding, scratch and chip removal, pre-polishing preparation. These bits will fit in your dremel, (use 1/8" collet), roto, moto, tools. Even works in a standard electric or hand drill with variable chuck. Great for drilling, shaping, grinding, stone, pearls, glass, metal, shells, plastic, wood, etc.
Operate all rotary tools on slow speed only. Always use eye, lung, and hand protection !


These diamond tipped bits are going to come in very handy if you are working with jewelry or beads.  A fantastic price for a wonderful product. What are your waiting for ?

Please see my other ebay store listings. Thank you !

Multiple purchases ship in the same package to save postage costs.

Buyer pays shipping/handling. Pay securely and item(s) will ship next business day.  Thank you for looking !



 DRILLING TIPS
If you are drilling beach glass or any hard or soft stone or bead, you need diamond drill bits. I would suggest the 40 grit 30 piece set to start with. 40 grit will cut very fast and is great for drilling holes. You get an assortment of sizes and shapes which you can experiment with. Eventually you will find certain shapes that work best for your application. 
The hole you drill will be rough because the 40 grit is coarse and you may want to use a 150 grit drill to smooth the inside of the hole with. If you are stringing on wire you may not need to smooth the inside of the hole but if you string your items on thread, you should follow up with the 150 grit bits.
400 & 600 grits are great to use also prior to polishing, the finer the sanding, the easier it is to get the scratches out and achieve a high polish.  I keep all five grits handy for my work, (40, 120, 150, 400, 600). Using these five grits, you can take most rough stone to pre- polish state. You will love these !

Start off with good protection. Glass, stone, shell, in powder form is dangerous and not good to breath. Use good eye protection with side protection, get in the habit of using a respirator to protect your nose and mouth against the small particles you will create in the drilling or polishing process. I use a full face shield with a respirator, also buy a full size apron and wear that to protect your clothing from dust particles.

I like to drill glass or stone by holding it under water. Put the piece into a shallow container like the tin lid of an old mayonnaise jar. Be very careful because the combination of water and electricity is dangerous. Hold onto the glass shard, (item to be drilled), with your left hand and holding the flex shaft handle (drill) with a diamond drill bit in your right hand. Insert the drill bit tip (ONLY) through the water and drill the glass shard or stone, (you only need enough water to cover the shard laying on its side). Drill slowly at first and allow the tip to seat and then adjust your drilling once the hole has started. I drill slowly because it saves the tips longer. I like to drill half way through the shard and then flip the shard over and drill through the other side of the shard to meet the hole started on the lst side. You will prevent shattering the 2nd side of the hole that way.