Material: aluminum + iron
Function:Microwave drying heating accessories
Product Name:Microwave magnetron
Model:2M246-15TAG Cold air long low plate
Installation hole spacing:width 35mm length 115mm
Base plate size:width 80mm length 127mm
Product Power:1000w
Product frequency: 2450MHz
Service life: 4000-4500 hours
Features:
Magnetron 2M246-15TAG long foot Compatible with most brands of microwave ovens, as long as the direction of heat dissipation and mounting hole size is the same, you can replace the magnetron can solve the following symptoms: poor heat dissipation. Fixed multi-hole installation, convenient and time-saving. Newly upgraded, stable performance.
Durable The magnetron is made of high quality material, durable and can withstand high temperatures commonly found in microwave ovens.
Easy Installation The straightforward installation process means you can get your microwave oven up and running again in no time.
Efficient Heating The magnetron plays a vital role in heating food quickly and evenly for efficient cooking.
Package Include:
1 x cavity magnetron
FAQ
Q:What is the base plate of this 2M246-15TAG like?
A:This is a long base plate with 4 screw holes at the front and back, the distance between the holes is 3.5cm wide and 11.5cm long.
Q:What is the frequency and power of the product?
A:The product frequency is 2450MHz, the power is 1000W.
Q:How long is the service life of the product?
A:It can be used for 4000-4500 hours under normal condition.
Q:What is the weight of the 2M246- 15TAG air-cooled long leg model?
A:The net weight of 2M246-15TAG air-cooled foot model is 0.84kg.
Q:Will it break on the way?
A:We ship with magnetron-specific foam and cardboard boxes, so don't worry about transportation.
Microwave oven does not heat the simple check method: a listen, two see, three test meter. When listening, first listen to the starting sound. The sound is much louder than normal, or there is an abnormal hissing sound, which may be a problem with the magnetron. Secondly, remove the outer cover of the microwave oven, first cut off the power supply for 1 minute or use sharp-nosed pliers on the capacitor discharge (high-pressure danger is not repaired, the base is not repaired), check the magnetron appearance of the magnet is not broken, whether the heatsink is loose, whether the white plug is burned, whether the microwave antenna head is burned, whether the copper gasket is burned, whether the transformer is burned, if it is the old model, check the furnace cavity mica sheet is burned, the new model pay attention to check the ceramic New model, pay attention to check the ceramic base plate. Three-meter test, first check whether the transformer has power, unplug the bottom two feet of power cord, connect the microwave oven bulb, or use a multimeter to test the AC voltage. If there is no power, then you need to check the microswitch, computer board relay and timer. . Then unplug the magnetron, transformer, diode, capacitor connection line, with a multimeter (preferably 10K pointer meter) to check the magnetron white two feet resistance, resistance value should be close to normal 0, resistance value of infinity that the magnetron is damaged; any one foot of the shell resistance value should be infinity, resistance value close to 0 that the magnetron is damaged. Transformer using a multimeter resistance curve to test whether the three groups of coils are intact. Resistance value of infinity indicates that the coil is damaged. Capacitor Whether the two pins are short-circuited, measuring the two pins of the pointer swings slightly to 0 for normal. If the resistance of the two ends of the shell is very small, it indicates that the shell is broken. Use the pointer multimeter to measure the resistance of the high-voltage diode 10K range. The ground terminal of the diode corresponds to the positive terminal of the multimeter. The resistance is infinite. Then check the resistance of the high voltage fuse. A resistance of infinity indicates that the fuse is open. The bidirectional diode, if present, should also be checked. If they are damaged, they can be removed and used. Connect a high voltage fuse with case between the high voltage end of the transformer and the capacitor. If all attachments test good and still do not heat up, cover one of the power lines at the power fuse with a ring ammeter to measure the current; if it is less than 5A, the magnetron is damaged (checking of the magnetron is more complicated)