Eigenschaften: E18-MS1-PCB verwendet den CC2530-Hochfrequenzchip, der von der Firma Texas Instruments (TI) importiert wurde. Der Chip integriert einen 8051-Mikrocontroller und einen drahtlosen Transceiver und ist für das ZigBee-Design und das 2,4-GHz-IEEE-802.15.4-Protokoll geeignet. Das Modul führt alle IO-Ports des Ein-Chip-Mikrocomputers heraus, der eine multidirektionale Entwicklung durchführen kann.
RF Parameter | Value | Remark |
Frequency | 2400~2480 MHz | Support ISM band |
Transmitting power | 27 dBm | - |
Receiving sensitivity | -99 dBm | Air data rate: 250kbps |
Communication protocal | ZigBee | - |
Test distance | 2500m | In open and clear air, with maximum power, 5dBi antenna gain, height of 2.5m, air data rate: 250kbps |
Hardware Parameter | Value | Remark |
IC |
CC2530F256RHAT/QFN40 |
Built-in PA+LNA |
FLASH |
256 KB |
- |
RAM |
8 KB |
- |
Core |
8051 MCU |
- |
Size |
16.0 * 22.5 mm |
- |
Antenna type |
IPEX |
- |
Communication interface |
I/O |
- |
Package |
SMD |
- |
Electronic parameter | Min. | Typ. | Max. | Unit | Condition |
Power supply | 2.5 | 3.3 | 3.6 | V | ≥3.3 V ensures output power |
Communication level | - | 3.3 | - | V | For 5V TTL, it may be at risk of burning down |
Transmitting current |
- | 500 | - | mA | Instant power consumption |
Receiving current |
- | 33 | - | mA | |
|
|||||
Sleep current | - | 2.4 | - | μA | Software is shut down |
Operating temperature |
-40 | 20 | +85 | ℃ | - |
Operating humidity |
10 | 60 | 90 | % | - |
Storage temperature |
-40 | 20 | +125 | ℃ | - |
|
PinA No. |
Pin item |
Pin direction |
Pin application |
1 |
GND |
Ground |
|
2 |
VCC |
Power supply 2.0 -3.6V DC |
|
3/4 |
P2.2/P2.1 |
Input & Output |
MCU GPIO |
5 |
P2.0 |
Input & Output |
MCU GPIO |
6/7 |
P1.7/P1.6 |
Input & Output |
MCU GPIO |
8 |
NC |
|
Empty |
9 |
NC |
|
Empty |
10/11 | P1.5/P1.4 |
Input & Output |
MCU GPIO |
12/13 |
P1.3/P1.2 |
Input & Output |
MCU GPIO |
14/15 |
P1.1/P1.0 |
Input & Output | MCU GPIO |
16/17 |
P0.7/P0.6 |
Input & Output | MCU GPIO |
18/19 |
P0.5/P0.4 |
Input & Output | MCU GPIO |
20/21 |
P0.3/P0.2 |
Input & Output | MCU GPIO |
22/23 |
P0.1/P0.0 |
Input & Output | MCU GPIO |
24 |
RESET |
Input | RESET |