Metallic, E-marked exhaust sticker.

Manufactured in heat-resistant, purpose-made, vinyl.

Ideal for use on after-market exhausts where the original "legal" markings have worn off due to age.

100% pass rate with both "spot checks" and MOTs

These stickers should be placed as close to the rear (exit) of the exhaust muffler as possible, as they are heat "resistant", not completely "heat proof", so can suffer damage if inadvertently positioned on a "hot spot", closer to the front of the bike. 

Thin, self-adhesive, design (although we recommend that the stickers are lacquered over with heat-resistant lacquer to help prolong their legibility and life, if required).

(Please be careful to use a lacquer that will not react with the ink on the sticker, however, as it has recently been brought to our attention that some contain an aggressive chemical that can cause the ink to "smudge"....check with the retailer prior to purchase).

These stickers measure 60mm long x 20mm high, as shown in the photographs.

Urgent Update !!!

Please note that it has been brought to my attention that several inferior versions of these stickers are now being offered on eBay + other sites by "car" dealers, etc...some of which have, apparently, even had the cheek to closely copy my advert wording and photograph (which we have been using for over 10 years!). Whilst we are very flattered, I must, however, stress that All Bikes Racing has no connection with these "mimics" whatsoever and take no responsibilty for the quality, or otherwise, of the goods they are attempting to supply. Quite simply, our stickers are the "originals" and the manufacturers that we use do not supply anyone other than ourselves.

Thank You.

+ Another couple of "updates"....please read !

I have also received one "neutral" feedback from a foreign gentleman who purchased one of these stickers. It was my first ever "non positive" feedback in regard to these items, as you can see if you check my ratings. Apparently, this gentleman translated the word "metallic" into meaning "made out of metal", which, obviously, is an incorrect translation, otherwise there would be no such thing as "metallic PAINT", for example. I e.mailed him to explain this and respectfully requested that he removed this "neutral" rating but this was never done. Hence, I thought it best to explain why my previously "100%" positive status has now been flawed.......(the stickers are "metallic", but NOT actually "tin" or "metal"...they are manufactured from a special, heat-resistant vinyl, EXACTLY as described in the listing + always have been).

AND, a further "neutral" feedback has just (January 2020) been received from a "gentleman" that lives in Jersey. The MOT Tester that "failed" his machine`s test (allegedly, although he would not send us the Refusal of an MOT document to verify the accusation, for some reason ?)  was not aware of the fact that the "SG1574 e13 0094" marking on our stickers is equivalent to the old "BSAU"-type  markings. Unfortunately, the "Mr Jersey" chose to view this as "our" problem, rather than the fault of the MOT Tester that didn`t know his job properly and, hence, gave us bad feedback (which he later refused to remove, even though we refunded his payment as a "gesture of goodwill" AND sent him legal documentary evidence to prove that our stickers have the correct, legal markings on them). It is individuals like "Mr Jersey" that will eventually ruin eBay, unfortunately, because none of the Sellers will be able to trust the Buyers anymore and the whole thing will collapse, which will be a sad, sad loss for genuine "Sellers" (such as ourselves) and genuine "Buyers" (such as the vast majority of our customers). Rant over. :(

Thank you for your time in reading this update...it is appreciated.