SS-02 Professional Pro Solder Sucker Pump with Silicone Tip Nozzle
Product information:
Material: Aluminium Alloy
Colour: Grey
Packaging: De-soldering Pump + 2 x 50mm silicone tubing
Feature:
• Excellent Performance: Strong suction, anti-static, easy to clean, replaceable tip.
• Anti-clogging: Long thimble can effectively prevent frequent use to block the suction nozzle.
• High Temperature Resistance Tin/Solder Sucker: The nozzle made of excellent nylon material is more temperature resistant than ordinary nozzles.
• Powerful Suction Solder Sucker: With a high pressure vacuum which helps remove solder effectively.
• Compact and Lightweight: Easy to carry, the de-soldering pump can be used with one hand, either your right or left hand.
• Strong suction, can effectively prevent air leakage.
• Compact design allows easy one handed operation and withstands direct contact with soldering iron (350C Max)
How to Use the De-soldering Pump
Step 1: Press the press head down until it is been locked and you will hear a click;
Step 2: Heat the solder joint with your soldering iron and allow the solder to become fully liquid;
Step 3: Move the nozzle of the pump next to the molten solder. Move the iron tip out of the way and immediately cover the liquid solder puddle with the pump's nozzle . Press the release button.
Step 4: Repeat this process if necessary.
• Anti-clogging: Long thimble can effectively prevent frequent use to block the suction nozzle. • High Temperature Resistance Tin/Solder Sucker: The nozzle made of excellent nylon material is more temperature resistant than ordinary nozzles. • Powerful Suction Solder Sucker: With a high pressure vacuum which helps remove solder effectively. • Compact and Lightweight: Easy to carry, the de-soldering pump can be used with one hand, either your right or left hand. • Compact design allows easy one handed operation and withstands direct contact with soldering iron (350C Max) Step 2: Heat the solder joint with your soldering iron and allow the solder to become fully liquid; Step 3: Move the nozzle of the pump next to the molten solder. Move the iron tip out of the way and immediately cover the l