80MM Spindle Dust Shoe Boot Collector for CNC Router Engraving Machine Durable

80mm Spindle Dust Shoe Boot Collector For CNC Router Engraving Milling/Machine

 

Description

This CNC dust cover is made of a high-quality ABS base and dense nylon bristle, making it strong, durable, and good at removing wood chips and dust. The flat knobs on both sides allow you to easily detach and replace the bristle. It's your ideal choice!

 

Key Features

Strong and Durable: The ABS base is waterproof, shock-resistant, strong, durable, and not easy to deform.

 

Highly Functional: The dense bristle can quickly remove sawdust and dust, so as to keep the workbench clean and tidy.           

 

Good Compatibility: The dust inlet and spindle diameter have suitable diameters, making it compatible with most CNC engraving machines, milling machines, and woodworking machines on the market.

 

Easy Assembly: You only need to align and buckle the tail slot, align the knob, put it down and tighten it, and tighten the flat knobs at both ends to install the bristle. The simple installation can save you lots of time and effort.

 

Double Straight Slots Design: It is designed with double straight slots, allowing you to directly lock it just by aligning the buckle and pushing it. It is anti-skid and more secure.      

 

Detachable Design: The bristle can be detached by rotating the flat knob on both sides for easy interchange when it wears out.

 

Lightweight: It only weighs 0.5kg/1.1lbs, allowing you to easily carry it to the workplace.

 

Guaranteed Customer Service: We aim to provide quality products and services. If you have problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.

.

Details

Nylon Bristle: The bristle is made of high-quality nylon with high elasticity and good bending, which is lint-free, wear-resistant, and heat-resistant.

 

Copper Inlay: The copper inlay inside the flat knob can prevent slipping and ensure a tight connection.

 

Application

It applies to a spindle diameter of 3-5/32".   It can be used in CNC engraving machines, milling machines, woodworking machines, etc. to quickly remove sawdust and dust to keep the workbench clean and tidy.

 

Specification

Color: White, Yellow

Material: ABS, Nylon

Dust Inlet Diameter: 10cm/3.9inch

Spindle Diameter: 80mm/3-5/32"       

Net Weight: 0.5kg/1.1lbs

Gross Weight: 0.65kg/1.43lbs

Product Size((L*W)): 25.8*14cm/10.1*5.5inch

Package Size: 18*15*26cm/7*5.9*10inch

 

Package Included

1* CNC Dust Cover

 

Notes

  1. Please check the screws regularly to avoid falling off and damaging the tools, and replace the brushes in time to ensure the effectiveness of the dust collection.
  2. Please confirm the size before purchase.
  3. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

 

 

 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
PushAuction

On Jan 17, 2024 at 03:03:15 PST, seller added the following information:

DataCaciques