【UK】4 Axis Nema 23 Stepper Motor Driver 112mm 425Oz USB Mach3 CNC Controller Kit For CNC Router Milling Engraving Machine


【Ship from Germany Warehouse】

fast shipping time to the following EU Countries

Austria,Belgium,Bulgaria,CzechRepublic,Denmark,Estonia,Finland,France,Germany,Greece,
Hungary,Ireland,Italy,Latvia,Liechtenstein,Lithuania,Luxembourg,Monaco,Netherlands,Poland,
Portugal,Romania,Slovakia,Slovenia,Spain,Sweden.United Kingdom.

We will ship this item from our Germany Warehouse by DHL to EU customers.

Estimated transportation time:

1-2 working days to: Germany
2-3 working days to: Austria,France,Spain and Italy
3-4 working days to: Other Europe Countries.


Parcel include:

  • 4Pcs 23HS2430B Nema23 Stepper Motor 112mm,425oz-in,3A
  • 4Pcs CW5045 stepper motor driver 24-50V DC,4.5A
  • 1Pcs 400W 36V DC 11A DC switching power supply
  • 1Pcs 4 Axis USB Mach3 Motion Control Card
  • 1Pcs USB cable
  • 1Pcs CD disk



Product descriptions:


                                             100% Brand New and High Quality!!!


4

About this item



1. Stepper Motor

23HS2430B Nema23 Stepper Motor

  • Motor Type: Hybrid
  • Step Angle: 1.8 degree
  • Holding Torque: 425oz.in/2.8Nm
  • Rated Current/phase: 3A
  • Phase Resistance: 1.6ohms ; Inductance: 6.8mH+/-20%(1KHz)
  • Frame Size: 57 x 57 x 112 mm
  • Body Length: 112mm
  • Number of Leads: 4
  • Weight: 1.66kg
  • Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length
  • Our motor is made of solid and durable metal. The perfect combination of rubber and rotor makes the internal structure more stable, and also reduces the vibration and noise when the engine runs.
  • The motor runs more quietly, with a high torque of 425oz in. The coil uses pure copper enamelled wire to ensure that long-term operation will not lead to excessive engine temperature.
  • The rotor surface is coated with high-quality epoxy resin adhesive to isolate the adsorbed burrs on the rotor surface, more stable magnetic field and longer service life of motor.
  • Stepper motor's red wire connect to driver's A+ port
  • Stepper motor's green wire connect to driver's A- port
  • Stepper motor's yellow wire connect to driver's B+ port
  • Stepper motor's blue wire connect to driver's B- port

Technical Specifications

General Specification:

Step angle accuracy:+ -  5%(full step,not load)

Resistance accuracy: + - 10%

Inductance accuracy:+ - 20%

Temperature rise: 80deg Max(rated current,2 phase on)

Ambient temperature ----------—20deg  ----  +50deg

Insulation resistance:100ohm  Min,500VDC

Insultion Strength--------500VAC for one minute

Datasheet(23HS2430B,Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque)



  • Stepper motor's red wire connect to driver's A+ port
  • Stepper motor's green wire connect to driver's A- port
  • Stepper motor's yellow wire connect to driver's B+ port
  • Stepper motor's blue wire connect to driver's B- port






CW5045 driver

2

e

s

  • GND：DC power cathode
  • VCC+：DC power positive pole
  • GND：DC power cathode
  • A+、A-：Stepping motor one winding
  • B+、B-：Stepping motor other winding
  • PUL+、PUL -：Stepping pulse input+5V
  • DIR +、DIR-：Stepping motor direction input
  • ENA+、ENA- : no need to connect

  • Dimensions: 118mm×76mm×33mm
  • Shape design is convenient for installation
  • Working environment: Temperature -15-40℃ Humidity<90%

  • High-performance motor driver
  • Mircostepping: 1(1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250
  • DC power input type: 24V~50VDC
  • Output current: 1.3A-4.5A
  • Phase: 2 phase
  • Weight:＜300g

4 Axis USB Mach3 control board

3

e

4

  • Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
  • Support for connecting electronic handwheel;
  • MCU model: three generation 32-bit STM processor
  • Communication plug-in: RnR motion control card - ECO-2.0

  • 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device.
  • 4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device.

  • Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives;
  • Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
  • Have 0-10V signal output,you can use mach3 software to control the spindle motor speed.
  • One status LED, indicate connection status on the board.

2

Please strictly follow the instructions and warnings before using this product:

  • It is recommended that the limit switch and emergency stop switch must be installed first and can be used normally.
  • The output singal of theelectronic handwheel must be 5V, more than 5V output will damage the hand wheel interface.
  • This interface can output 0-10V analog signals
  • USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.
  • This control board does not require any drivers to be installed,as long as Mach3 can run, the control card can be used;
  • Support computer system: Windows 2000/ XP / Windows 7/8/10
  • The inverter interface (AVI +, AVI-) is isolated from the computer and the main control circuit, and has strong anti-interference ability,no interference signal will be introduced due to the introduction of external strong electrical equipment.
  • Whether frequency converter is supported: Yes
  • Support PWM: Yes
  • Number of control axes: X.Y.Z.A axis

400W 36V DC Switching Power Supply

d

  • Model: S-400W-36V
  • Output Current:11A
  • Output Voltage:36V
  • Output Frequency:85%
  • Output Power: 400W
  • L: Live wire
  • N: Negative wire
  • +V: DC power output “+”
  • -V: DC power output “-“
  • +V ADJ: output voltage regulation

400W 36V 11A DC Switching power supply

4

5

6

  • Adopting high-quality shell,with better heat dissipation performance of the radiator,the power supply lasts for a long time and has a long service life.
  • It comes with built-in cooling fan and many holes on the metal case, which makes heat dissipation more efficient.

  • Enough widing coils ensure pure copper,reliable performance,sufficient power,and stable work.
  • High efficiency and low operation temperature.

110V or 220V

  • Input: 110-120V AC or 220-240V
  • Please flip the side input voltage selector switch



Shipping
Please open the package and check when you receive the parcels,if there are some damages before sign,if there are some damages , please do not sign and contact us immediately.
We will ship your order within 1-2 working days after payment.

Refund&Replace
Any reason required for all refund.Item must be in it's original condition and no physical damage.

Feedback
Please contact us first when you have problems,and we will try our best to help you to solve it.
Pls contact us before you want to leave any negative feedback,we will provide solutions,negative feedback can not solve any problems.

Customers' service
1.We are happy to have your questions.If you have any question before or after purchase, please feel free to contact us.
2.If there is any problem about the items when you have them , please contact us firstly. We are here to solve them by the friendly and quick ways.