Pre Wired-SG Guitar Potentiometers
Easily
upgrade your old wiring using top of the line components for long life and
great sound Installation Wiring Diagram included!
FANRUI Very
High-quality Vintage Potentiometers 500k spec +/- 10 these were made
to my specs and are 3/8" pots that are of high quality just like the
CTS pots!
Brass short split shaft with coarse knurling
8mm diameter shaft
fits for most control knobs.
Includes washers and
mounting nuts.
Specification:
Resistance: /A500k ohm
Shaft Diameter: Approx. 8mm.
Shaft
Thread diameter: Approx. 8mm 3/8".
Shaft
Length: Approx.15mm 3/8".
Base
Diameter: Approx.24mm 0.944".
Whole
Length: Approx.33mm 1.29" .
Sprague®
Orange Drop Tone Capacitor .022uF
This is
the Sprague® Orange Drop .022 Microfarad tone capacitor. Highest quality tone
capacitor available! Audio grade Polypropylene dielectric material provides a
smooth, Wah type tone with no sonic impurities. These are not the low-grade
Polyester Orange Drops others sell. The cap is generally used with humbucking
pickups.
High performance version of the
popular 715P series. They are made from polypropylene film and foil with pure
copper leads, making them ideal for high pulse current applications. Rated for
85 degrees Celsius operation ± 5% tolerance. Straight radial leads,
minimum 1.25" length.
This series is manufactured with
polypropylene film and extended foil. Polypropylene has a very low dissipation
factor, low dielectric absorption, and exhibits excellent capacitance
stability. These characteristics combined with the direct connection of the
lead wire to the extended foil electrode makes this series ideal for high
current, high pulse applications.
This series has a pressed profile and,
in addition, is designed with copper leads, thus adding to its performance
in high frequency, high pulse current applications.
Wire - Gavitt,
Cloth w/ braided shield, 22AWG stranded, Topcoat Pre-Tinned
High quality USA made
Gavitt. This wire features an outer waxed cotton braid over
a Celanese braid. The wire is stranded 22AWG with a tinned overcoat
(topcoat) so no additional tinning with a soldering iron is required for use.
¼ Jack 1 - Rean, Mono, Open Circuit
2 pole open ¼" jack, 2 contacts, with
washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs
Item Diameter |
19.5 mm |
Panel Thickness |
3.5 mm |
Tab Length |
25 mm |