NICKEL PLATING KIT 6 Litre

 

Larger Anodes – give more plating, with more even results Plates up to 60 square feet [ 5.5 square meters] of decorative Nickel Constant auto agitation and filtering with New Pump/filter included Simpler Instructions New Degreaser Tank Included New HOT heater for Degreaser included

Our nickel plating kits are designed to provide a commercial quality finish on a miniature scale, in approx. 20 minutes. The finish can be applied as a final treatment, requiring VERY LITTLE buffing to obtain a high shine, or as a base for chrome plating.

Nickel plate has a very slight yellow color to it, but in many applications, if polished, it can double as a chrome plate.

All our chemicals are pre-weighed, so all you have to do is to add distilled water. We have tried to keep the processes as simple as possible and have standardized everything wherever we can.

The kit will plate onto steel, copper, bronze, brass, zincated aluminum, activated nickel, activated Stainless, Flash Copper™, or Bright Acid Copper. This system is too acidic for pot metal, which should be plated first in Flash Copper™.

 

Plate a beautiful nickel layer onto most metals.

Great for automotive parts and decorative items.

Use as an under layer for a show chrome plate.

 

Nickel plate may also be applied over a copper plate, and copper plate will adhere to the nickel. We suggest you apply copper plate to any areas with large scratches or pits, repair them using our solder-it pastes and then nickel plate them. By buffing the copper plate before nickel plating, you can achieve a very high quality finish, similar to 'Show Chrome". If this nickel finish is then chrome plated, the part will be 'Show Chrome'.

All instructions and operating procedures are detailed in the Complete Plating Manual. Each anode will plate about 32 sq. ft of surface area at 0.0005" before it needs to be replaced. The solution is virtually permanent. No waste chemicals or dangerous fumes are produced.


NP1 Nickel Plating Kit 6 Litre 

2 x 10 Litre Plating Tank & Lids
2 x 150mm x 200mm Nickel Anodes and Bandages
1 Pack Degreaser, makes 15 Litres
1 Packs Nickel Crystals with brighteners (Makes 6 litres per pack)
1 x Air Pump Agitator
The Complete Plating Manual

x1 nickel start up solution 360ml

Free Technical Support

  

Improved Brighteners

NEW!! CASWELL NICKEL/COPY CHROME™ BRIGHTENER will produce highly ductile deposits, which are free from laminations. It produces brilliant, white deposits of high clarity, reflectivity and depth. The deposit is active and can be chromium plated if specified.

Superior ‘leveling’ properties enable fine scratches and imperfections to be filled, enhancing the overall finish.

Our regular Nickel & Copy Chrome™ now plates faster with more coverage in the low current density area. It produces 20 to 30% more thickness in the lower current density area than any other system. If you are chrome plating onto this nickel, you will also get better chrome coverage in the low current density than any other nickel

YOU MUST SUPPLY


Power Supply  
Heater
Copper Pipe for tank bar
Copper Wire to hang items
Small amount of electrical wire to make connections
Distilled water

SHIPPING

NOW AVAILABLE AUSTRALIA WIDE

    • We can not ship to a PO Box OR Parcel Lockers. Residential or Business addresses only
    • All Deliveries require a signature.
    •  Please ensure you provide an address for delivery that will have some one there. We suggest a work address if no one is home during the day.
    • Re-Delivery on uncollected items will cost the shipping price again so please check your letter box, and call once carded.
    • $30 Flat Charge per order combine as many products for 1 flat fee.

    • We use couriers to transport goods, a tracking number will be provided upon dispatch. 
    • Some  Locations in NT, WA, TAS and QLD may not be accessible by road ( this is very rare but possible)

    • All Return shipping must comply with Australian Law and be paid for by the buyer.

    • We will happily combine shipping on multiple items.  There is a $30 Flat shipping charge per order.

    • We do not charge any shipping or handling cost for pickup.

    • Returns accepted up to 30days for unopened items.

    PICKUP

    • We welcome pickup on any purchases.
    • We do not charge pickup fees.
    • We are open by APPOINTMENT only; please call to arrange a time.
    • We welcome inspections prior to purchase.
    • We are located in Hoppers Crossing Victoria.

     

    CONTACT

    • For ease and convenience use the contact seller link provided by eBay
    • Visit us: By appointment only to view goods prior to purchase or for pickup.
    • We are Located at, Factory 1, Number 51, Elm Park Drive, Hoppers Crossing, Victoria.