An aluminum wire
stock for Beeman P1/P2 (German Weihrauch HW45/HW75)
The stock is installed via an
aluminum adapter which is mounted on the rear, as shown on the pictures.
The P1 adapter is fixed via screw and pin, while the P2 adapter is
fixed via pin and a bottom clamping screw.
The
screw and pin needed for installation are included in the purchase, the
existing pins need to be removed - remove securing disks (if exist)
before removing the pins. Tighten the screw only moderately to avoid
pressure friction. The stock and adapter will not affect the operation
of the Beeman while installed.
The length
of the stock is 27cm starting from the rear end of the adapter. The
stock is made of automotive grade aluminum, no cheap and weak plastics
used.
Please tell me whether you need the stock for P1/HW45 or P2/HW75 since the adapters are different.
This
item fully complies with Ebay's firearm/air gun/accessories policy.
The unit has been designed and built to fit the Crosman airguns listed only, it canNOT be modified into a firearm part without destroying the item!
This item does NOT alter/enhance the mechanical function of the air pistol!