3 in 1 Soil Water Moisture Probe and pH Meter 

Features

Our 3 in 1 tester soil meter will assist in growing healthy pants and vegetables. It works in vegetable gardens flower gardens, lawns and potted plants. The best way to ensure your plants reach their full potential is by determining if you have the proper soil conditions. The pH meter, not only indicates the amount of alkalinity or acidity in the soil, but it also measure moisture content and light quantities. 

Instructions

1. Don't insert the probe against stone or very hard soil in case to damage the probe

2. Please wipe and clean the probe after each time using.

3. Don't leave the meter in the soil for a long time

4. Designed for testing soil, don't use it to test pure water or other liquids.

5.The indicator will not move If the soil is too dry, please water the plant first and test again later.

Step 1: Switch moisture/pH/light position

Step 2: Stick the probe into the soil about 2-4 inches

Step 3: Adjust the position of the probe until the pointer on the dial swing slightly

Step 4: After 10 minutes, Note moisture/pH/light level in the dial

Step 5: Remove probe from soil and wipe clean after each use

Measuring Ranges

PH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)

Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)

Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)

Package Include

1x Soil Water Moisture Light PH Meter