Important note for customers outside the EU!
Any applicable import duties, taxes and fees
are not in the item price or den Shipping costs included.
The buyer is responsible for this responsible for fees.





A601MB
fully digital 6-channel power amplifier in more compact
Size (only 282 x 105 x 40 mm) for
Mercedes vehicles.

Danger!
Only for vehicles with standard speaker system.
Not for vehicles with original factory sound system
which has a separate amplifier in the vehicle!
The speakers must be connected directly to the radio!



Plug and play amplifier
for the front and rear speakers, the center speaker
and the bass or basses under the dashboard.
The cable set is also suitable for retrofitting a center
speakers prepared if none are already in the vehicle
is available.


for the following Mercedes models:

C Class (W205/V205/S205) from 2014 >
C Class (A205) from 2016 >
C Class (C205) from 2015 >


E Class (W213/V213/S213) from 2016 >
E Class (C238/A238) from 2017 >

GLC (C253/X253) from 2015 >

GLE (C292) from 2015 >
GLE (V167/W167) from 2018 >

GLS (X167) from 2018 >

G Class (W463) from 2018 >



Sound description after installation:
More spacious, open sound with much more
bass and dynamics.
You can also play the music much louder.


Mounting location of the amplifier:
We recommend the mounting location for the amplifier
spare wheel well or behind one of the side panels
in the trunk.


Tapping / laying the lines:
The music signals / lines of the front and rear speakers
and possibly existing center speaker are behind the
Factory radio tapped at the radio connector and there again
led back.
The lines to the bass or basses must be connected directly
these are routed under the dashboard.

The power cable for the amplifier must be taken from the battery
be transferred to the amplifier.

The ground wire can be attached to the body near the
amplifier to be attached.


Description:
With the amplifier, the front door speakers,
the rear speakers and the bass under the
Dashboard separately controlled.
This makes it possible to adjust the volume ratio between
Loudspeakers and basses can be optimally adjusted separately.

In addition, the amplifier has a high-pass filter for
the speakers to free them from low tones
and a low-pass filter around the bass from mids
and release heights.

Thus, the speakers are more resilient and bass
sound much cleaner and more dynamic.



Technical specifications:

- 6-channel amplifier with Mercedes specific
cableset

- 4x 100 watts RMS at 4 ohms
or
4x 160 watts RMS at 2 ohms

- 2 ohms stable!

- per channel pair selectable low-pass filter or
High-pass filter and stepless from 40 - 400Hz
adjustable

- Frequency Response: 10 - 35,000Hz

- automatic switch-on function
incoming music signal

- Dimensions (LxWxH): 282 x 105 x 40mm


Scope of delivery:

- Axton A601 6-channel amplifier

- Mercedes specific cable set

- 5m 20mm² power cable, 1m 20mm² ground cable,
Fuse holder, fuse, eyelets for
Attachment to battery and body

- Invoice in your name
VAT shown



Visit my ebay shop: acr-hof


If you have any questions about the product
have, so write us an Ebay message
or use the phone number or
Email address below in the
"Seller's Legal Information"
> "complete information"


You can reach us at the following times:

Tuesday - Friday 10.00 a.m. - 6.00 p.m
Saturdays 10 a.m. - 2 p.m



DISCONTINUED WITH
are not in the item price or den Shipping costs included. The buyer is responsible for this responsible for fees. fully digital 6-channel power amplifier in more compact The speakers must be connected directly to the radio! The cable set is also suitable for retrofitting a center speakers prepared if none are already in the vehicle We recommend the mounting location for the amplifier The music signals / lines of the front and rear speakers Factory radio tapped at the radio connector and there again The lines to the bass or basses must be connected directly The power cable for the amplifier must be taken from the battery This makes it possible to adjust the volume ratio between Loudspeakers and basses can be optimally adjusted separately. In addition, the amplifier has a high-pass filter fo
are not in the item price or den Shipping costs included. The buyer is responsible for this responsible for fees. fully digital 6-channel power amplifier in more compact The speakers must be connected directly to the radio! The cable set is also suitable for retrofitting a center speakers prepared if none are already in the vehicle We recommend the mounting location for the amplifier The music signals / lines of the front and rear speakers Factory radio tapped at the radio connector and there again The lines to the bass or basses must be connected directly The power cable for the amplifier must be taken from the battery This makes it possible to adjust the volume ratio between Loudspeakers and basses can be optimally adjusted separately. In addition, the amplifier has a high-pass filter fo