Important note for customers outside the EU!
Any import duties, taxes and fees that may apply

are not included in the item price or the Shipping costs included.
The buyer is responsible for this Responsible for fees.





A601MB
fully digital 6-channel power amplifier more compact
Size (
only 282 x 105 x 40 mm) for
Mercedes vehicles.

Danger!
Only for vehicles with standard loudspeaker systems.
Not for vehicles with original factory sound systems
which has a separate amplifier in the vehicle!
The speakers must be connected directly to the radio!



Plug & Play amplifier
for the front and rear speakers, the center speaker
and the bass(es) under the dashboard.
The cable set is also suitable for retrofitting a center
Speaker prepared if there is no one in the vehicle yet
is available.


for the following Mercedes models:


C-Class (W205/V205/S205) from 2014 >
C-Class (A205) from 2016 >
C-Class (C205) from 2015 >


E-Class (W213/V213/S213) from 2016 >
E-Class (C238/A238) from 2017 >


GLC (C253/X253) from 2015 >

GLE (C292) from 2015 >
GLE (V167/W167) from 2018 >

GLS (X167) from 2018 >

G-Class (W463) from 2018 >



Sound description after installation:
More spacious, more open sound with much more
Deep bass and dynamics.
You can also play the music much louder.


Amplifier installation location:
We recommend this as the installation location for the amplifier
Spare wheel well or behind one of the side panels
in the trunk.


Tapping/laying the cables:
The music signals / lines of the front and rear speakers
and if necessary existing center speakers are behind the
Take the factory radio from the radio plug and put it back there
led back.
The lines to the bass(es) must be connected directly
this can be led under the dashboard.

The power cable for the amplifier must come from the battery
be routed to the amplifier.

The ground wire can be attached to the body near the
amplifier.



Description:
The amplifier is used to control the front door speakers,
the rear speakers and the bass underneath
Dashboard controlled separately.
This makes it possible to adjust the volume ratio between
Speakers and bass can be optimally adjusted separately.

The amplifier also has a high-pass filter for
the speakers to free them from low tones
and a low-pass filter around the bass and mids
and heights to liberate.

This makes the speakers more resilient and bass
sound much cleaner and more dynamic.



Technical data:

- 6-channel amplifier with Mercedes-specific
cableset

- 4x 100 watts RMS at 4 ohms
or
4x 160 watts RMS at 2 ohms

- 2 ohms stable!

- Low-pass filter selectable per channel pair or
High-pass filter and continuously variable from 40 - 400Hz

adjustable

- Frequency response: 10 - 35,000Hz

- automatic switch-on function
incoming music signal

- Dimensions (LxWxH): 282 x 105 x 40 mm


Scope of delivery:

- Axton A601 6-channel amplifier

- Mercedes specific cable set

- 5m 20mm² power cable, 1m 20mm² ground cable,
Fuse holder, fuse, ring eyelets for
Attachment to battery and body

- Invoice in your name
VAT shown



Visit my eBay shop: acr-hof


If you have any questions about the product
If you have one, write us an eBay message
or use the phone number or
Email address below
“Legal information of the seller”
> "complete information"


You can reach us at the following times:

Tuesday - Friday 10 a.m. - 6 p.m
Saturdays 10 a.m. - 2 p.m



SET WITH
are not included in the item price or the Shipping costs included. The buyer is responsible for this Responsible for fees. The speakers must be connected directly to the radio! The cable set is also suitable for retrofitting a center Speaker prepared if there is no one in the vehicle yet We recommend this as the installation location for the amplifier The music signals / lines of the front and rear speakers and if necessary existing center speakers are behind the Take the factory radio from the radio plug and put it back there The power cable for the amplifier must come from the battery The amplifier is used to control the front door speakers, This makes it possible to adjust the volume ratio between Speakers and bass can be optimally adjusted separately. High-pass filter and continuously