Recone kit for the Cerwin Vega 15W5 used in the E715 and LS-15. Red over gray foam like original. Precision voice coils, on ALUMINUM formers like the originals, and wound like the originals. Both the E715 and LS-15 came with several different woofers, so you will need to pull one out, and verify the model of the woofers you have in your speakers. If you have a woofer model# starting with "wofh", these kits will NOT fit. Now, if you do have the 15W5 woofer, hold on to your hat, because "the book" on these woofers has been wrong, for decades. Every other kitmaker has listed the recone kit for these woofers, as 8 ohms. Well, every 15W5 myself and others have torn down and checked (and it's been MANY) they are actually FOUR ohm woofers. And on close inspection of the coils, we've worked out which ones they used. And that specific 4 ohm voice coil, is included in this kit. Now it's possible that these woofers also came in 8 ohms, but I haven't found one yet. The best thing to do, is measure the ohms of your woofer. (note: the ohm rating of the whole speaker is irrelevant, 8 ohm speakers can have 4 ohm woofers, and vice versa) So you have to take the woofer out, disconnect it, and measure it. If it's around 3.3 or 3.4 dcr on a handheld meter, it's a 4 ohm woofer. If it's more like 7 ohms, it's an 8 ohm woofer. If you do have an 8 ohm woofer, let me know and I'll make you an 8 ohm kit. But I'll bet you a box of donuts, it's going to be 4 ohms. Making these the only correct kits for your woofers, anywhere. This listing includes the stock type tan/yellow spiders. I also have black spiders available (see my AT15 kits) The black ones are stiffer. The stock stiffness for these woofers is "c". but the stock spiders are a pretty light "c", almost a "b". The yellow ones I supply are a hair stiffer than many replacements, and don't distort after a pounding. However my black ones are a heavy C, a little stiffer yet. So if you are going to pound the bejesus out of these with a 80 pound 1000 watt Crown amplifier, I'd suggest the black spiders. But if you're using just a regular HT receiver or something with 100 or 200 watts per channel, then I'd say go with the tan/yellow ones. If you do want the black ones, just message me when you buy and let me know, and I'll pack those in the kit for you.  Several years, and more recones than I can count went into developing kits that not only take the pounding that I know you're going to give them, but also match the t/s parameters of the originals as closely as possible. Kits include everything in the picture. Shims available on request.  Also included is a sheet of tips and suggestions from decades of experience, along with my personal phone number should you have an issue. If you have any questions, or want a specific bunch of parts put together for you, let me know. I'm here to help and happy to put together any combination of parts you need. 20+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!