Up for sale an ENGL Thunder 50 Reverb E320 50-Watt All-Tube Guitar Combo Amplifier w/Footswitch - #236893!  We are an Authorized Dealer of ENGL Amps!  This beautiful amplifier is a Used Model in Good Cosmetic Condition and in Perfect Working Condition.  On this one, there are some scratches, marks, tiny notches, few tiny tolex rips, slight plating deterioration (chrome parts, control panel) and few other signs of wear here and there (see 13th to 24th pictures), but nothing major.  Also, there are scratches, tiny nicks and slight plating deterioration on the footswitch (see 12th picture).  Unit comes with an ENGL Z-4 Footpedal, Footswitch Cable and a Power Cord.     

- 

ENGL THUNDER 50 REVERB E320 COMBO

is an all-tube guitar amp, fully loaded with all key features. Next to its sonic qualities, the beauty of this amp is rooted in simplicity. With its uncluttered, sensibly arrayed control features, the Thunder comes complete with everything you need to dial in first-class sound. Handling couldn't be easier. With the Thunder, what you see is truly what you get-great looks, great sound. The latest in a line of classy amps, the Thunder delivers that unmistakable ENGL sound-warm, creamy and extremely dynamic tube tone. The Thunder 50 Reverb (model E320) is a Combo version equipped with a spring reverb. Quality components, excellent workmanship and strict quality control ensure this amp retains its value.

-

SPECIFICATIONS:

Front:

- Input : Input¼" unbalanced input. Plug your guitar cord in here.

- Gain : Controls input sensitivity. Use this knob and the Master (10) control to adjust the volume of the Clean channel. For the Crunch and Lead channels, Gain controls the amount of preamp distortion.

- Crunch / Lead : Channel selector pushbutton for Crunch and Lead modes in the Lead channel. This function can also be activated via a footswitch (jack 15). Once a footpedal is connected, the channel selector pushbutton is deactivated.

- Bass : Bottom end voicing control.

- Middle : Mid-range voicing control

- Treble : Upper range voicing control.

- Reverb (Thunder 50 Reverb, Combo model E320 only) : This knob controls the amount of reverb. As you rotate the knob clockwise, the intensity of the reverb effect increases.

- Lead Volume : Volume control for the Lead channel (and the Crunch channel at model E320). Use this knob to dial in the desired balance of levels between the Lead (& Crunch at model E320) and Clean channels.

- Clean / Lead : Channel selector pushbutton for Clean and Lead channels, red LED indicate Lead mode; This function can also be activated via a footswitch (jack 15). Once a footpedal is connected, the channel selector pushbutton is deactivated.

- Master : Master volume control for power amp output.

- Stand By : Power amp standby switch: Use this switch to silence (0 position) the amp when you take a lengthier break. The amp's tubes stay warm, which means that it is ready to roll immediately when you switch it back to full power. The standby switch is also well-suited for muting the amp for brief breaks, for instance when you're switching guitars.

- Power : AC power on/off

Rear:

- AC Socket : Connect AC cord here.

- AC Fuse Box : Contains mains fuse (rear chamber) and spare fuse (front chamber).

- Footswitch: Clean / Lead; Crunch / Lead 1/4" stereo jack for double footswitches, executes the following functions:

1. Channel switching Clean/Lead (mono terminal)

2. Channel switching Crunch/Lead (stereo terminal).

- FX Loop : Send Signal output for the Effects loop. Connect this output to a signal processor’s input/return jack via a shielded cable with 1/4" plugs.

- FX Loop : Return Signal input for the Effects loop. Connect this input to a signal processor’s output/send jack via a shielded cable with 1/4" plugs.

- Balance : FX mix control for the Effects loop: Rotate the knob to the Dry position for the pure amp signal, i.e. no effect on the signal. Turn clockwise to blend in an effect connected to the loop to the dry signal (parallel/passive). At the Effect position, only the wet signal, i.e. the signal sent from the FX device is fed to the power amp (serial/passive).

- Poweramp Output, Possible speaker combinations:

1 x 8 ohms or 2 x 16 ohms (Jacks 19 and 20) or

1 x 16 ohms (Jack 21!) or 2 x 8 ohms (Jacks 21 and 22).

Rated power : approx. 50 watts at 8 or 16 ohms;

Tubes: 

- V1 (input-tube) : ECC83 / 12AX7, FQ Grade

- V2, V3 : ECC83 / 12AX7 selected

- V4 : ECC83 / 12AX7, standard

- V7, V8 : 5881 (6L6GC) matched set

Dimensions : Combo E320 approx. 52,5 x 45 x 25 cm, (20,7 W x 17,7 H x 9,8 T)

Weight : Combo: approx. 22 kg (48,4 lbs)