Techniweld AGCLAIRVOYANT3.0 Armour Guard Crystal Clear Blue View 2" x 4 1/4" Multi Shade Auto-Darkening Filter Lens. Version 3.0
Features:
- Stainless Steel Frame: Reflects infrared light that causes heat build-up, keeping the lens cartridge cooler & allows for a thinner lens which fits in all 2" x 4-1/4" welding helmets.
- Ultra Thing measuring only 0.193"
- Anti-Flicker tech: The Clairvoyant 3.0 improves on one of the world's fastest dim switching speeds at 1/16000th of a second, with its new & improved software for reduced flickering!
- Ambient light awareness: The anti-light interference mode prevents flickering!
- Gradual change delay: Provides a more comfortable gradual transition from dark state to light state to hopefully reduce eye fatigue.
- Cristal clear blue view technology.
- Efficient power management: Enhanced battery life using CR1025! 9-12 moths between battery replacement.
Tech Specs:
- Cartridge size: 4.25" x 2" x 0.193"
- View area: 3.8" x 1.38"
- Power: Solar and CR1025 Lithium battery.
- Shade: Clear at Shade 3. Dark at Shade 5 for cutting. Darkest at shades 8-13 for welding.
- Grind: Yes
- Sensitivity: 7 levels
- Delay time: 7 levels ranging from 0.06-1 second
- Switch time between shades: 0.06ms
- Optical quality: 1/1/1/2 according to EN379
- TIG capability: > 2A
Applications:
- Designed for use with welding, heating, or cutting/gouging
- Manufacturing– Architectural and Structural Metals, Mining, Agricultural, Motor Vehicles, Aerospace, Shipbuilding, and Pipelines
- Construction – Residential, Commercial, Bridges, Dams, Utilities or any other industry where welders may work
- Auto-Darkening applies change from light state to dark state when welding starts and will automatically return to light state when the arc stops
Usage Instructions:
Before welding
- Check the front & back polycarbonate lenses are securely in place to protect against impact, spatter, and scratching
- Adjust headband so that the helmet is seated on the head as low as possible and near to your face. Adjust helmet angle when in the lowered position by turning headgear
- Ensure helmet shell/frame does not obstruct solar panels or sensors, doing this may cause eye injury while welding
- Check the correct operation of the filter
Additional Instructions
Do not use or open the auto-darkening filter if damaged by shock, vibration or pressure. Keep the sensors and solar cell clean. Clean the filter cartridge using a soapy water solution and soft cloth which should be damp but not saturated. Do not leave lowered in position; a bright light surface could cause the filter to darken unexpectedly. Do not use solvents or abrasive cleaning detergent. If cover lens is spattered or covered with dirt, it should be replaced immediately. Do not use the helmet without inside and outside cover lenses properly installed.
Ships FAST with USPS