6N23P

Universal miniature dual triode with separate cathodes and low noise level in glass fingertip design.

Designed to work as a broadband amplifier and high-frequency mixer in circuits of low-power amplifiers and pulse generators.

The 6N23P double triode is used in radio engineering devices for general and special purposes.

Works in any position.

Produced in a glass finger design.

Indirectly heated oxide cathode.

9-pin base with button bottom.

Pin arrangement: РШ8.

Overall dimensions of the double triode 6N23P:

   - lamp height - 60 mm;

   - lamp diameter - 22.5 mm.

Weight no more than 16 g.

Operating time not less than 5000 hours.

Technical characteristics and electrical parameters of the 6N23P lamp:

Filament voltage 6.3 ± 0.6 V

Filament current 310 ± 25 mA

Anode voltage nominal (constant) 100 V

Anode voltage limit (constant) 300 V

Anode current of each triode 15 mA

Cathode current limit 20 mA

Cathode current limit (pulse amplitude) 200 mA

Grid voltage (DC) 9 V

Grid voltage limit (pulse amplitude) 260 V

Power dissipated by the anode, limiting 1.8 W

Power dissipated by the grid, limit 0.03 W

The voltage between the cathode and the heater is limiting (constant) -200 V

Slope per triode 12.7 mA/V

Gain of each triode 34 ± 9

Input impedance at 200 MHz 500 Ohm

Equivalent tube noise resistance 300 Ohm

Cathode resistance for automatic bias 680 ohms

Resistance in the grid circuit limit 1 MΩ

Input capacitance of each triode 3.6 pF

Output capacitance of the first triode 2.1 pF

Output capacitance of the second triode 1.9 pF

Capacitance through passage of each triode 1.5 pF

Capacitance anode - cathode of each triode 0.18 pF

Capacitance between anodes no more than 0.06 pF

Capacitance between grids no more than 0.005 pF

Miniature glass decoration