Feature:

1. The AC input range can be selected by the switch, which is very convenient to use.
2. This power supply can withstand 300VAC current for 5 seconds without damage.
3. There is an LED indicator for booting, which can withstand 5G vibration test.
4. After 100% full load aging test, the maximum working temperature can get 70℃.
5. With great workmanship, with high efficiency, long service life and high reliability.

Specification:

Item Type: BERM Switching Power Supply

Material: Aluminum, PCB
Purpose: Power supply function
Output Value: 
DC Voltage: 12V/ 24V
Rated Current: 10A/ 5A
Current Range: 0~10A/ 0~5A
Rated Power: 120W
Ripple and Noise (maximum): 120mVp-p/ 150mVp-p
Voltage Adjustment Range: 10.2 ~ 13.8V/ 21.6 ~ 28.8V
Withstand Voltage: ±1.0%/ ±1.0%
Line Adjustment: ±0.5%/ ±0.5%
Load Regulation: ±0.5%/ ±0.5%
Setting, Rise Time: 500ms, 30ms/ 230VAC; 500ms,30ms/ 115VAC (full load);
Holding Time (typical Value): 55ms/ 230VAC; 10ms/ 115VAC (full load);
Input Value: 
Voltage Range: 85~264VAC; 120~373VDC (withstand 300VAC current for 5 seconds without damage)

Frequency Range: 47 ~63Hz
Efficiency (typical value): 88%/ 90%
AC Current (typical value): 2.3A/ 115VAC    5A/ 230VAC
Inrush Current (typical value): 50A / 230VAC
Leakage Current: <0.75mA240VAC
Protection: 
Overload: 110~150％ of rated output power; protection type: Hiccup mode, automatic recovery after the fault condition is eliminated
Surroundings: 
Working Temperature: -20~+70℃
Working Humidity: 20~90%RH non-condensing
Storage Temperature and Humidity: -40~+85℃, 10~95%RH
Temperature Coefficient: ±0.03% ℃ (0 ~ 50℃)
Vibration: 10 ~ 500Hz, 5G 10 minutes/1 cycle, 60 minutes each along the X, Y, and Z axes.
Safety and : 
Safety Standard: EN60950-1, approved.
Withstand Voltage: I/P-0/P: 1.5KVAC I/P-FG: 1.5KVAC 0/P-FG: 0.5KVAC
Isolation Resistance: I/P-O/P, I/P-FG, 0/P-FG: 100M Ohms / 500VDC/25℃/ 70% RH

How to Use: Can be used when connected to the current line, L is connected to the live wire, N is connected to the neutral line, +v is connected to the output positive pole, -v is connected to the output negative pole, the white regulator can be used for fine adjustment, and the ground wire identification is the ground wire interface.

Package List:

1 x Power Supply