4Pcs Silicone Night Mouth Guard
Feature:
1. Good shape stability. Soaked in boiling water for a long time, the denture bracket will not be seriously deformed or contracted, so that it can not be used.
2. High transparency. The molded dental bracket can maintain high transparency and is especially suitable for use with a cold light whitening instrument.
3. Good thermoplasticity. Compared with similar products, thermoplastic has obvious advantages, especially suitable for family use, and the gingival line is very clear.
4. It can be formed repeatedly. Due to the inaccuracy of water temperature and soaking time, the molding effect of dental bracket is often not good. This product can be re-molded in 80-90 ℃ hot water even if it is not formed properly, which is not found in other products.
5. Thermoplastic trays have two functions, they can be used as tooth whitening trays that support the whitening gel. It can also be used as an anti-abrasion tray.
Usage:
1. Practice wearing braces: put the braces on the upper gums and suck out the air between the braces and the gums, so that the braces can cover the surface of the whole row of teeth.
Tips: practice twice, which is an important process of making dental braces. The lower dental braces are practiced in the same way.
2. Soften the denture base: pour the water at 80-90 ℃ into a flat-bottomed container with a depth of water that can immerse the denture base while the handle stays outside the surface of the water. Soak the denture base in water for 5-7 seconds and then take it out.
Tips: the denture is very soft at the moment, so the immersion time should not be too long. When the denture is raised, it should be soft and elongated, and it is appropriate to begin to deform slightly.
3. Make dental braces: put the dental braces forward, wear them carefully and quickly on the gums, and continue to suck in step 1. The finger presses the joint of the denture and the tooth to make it thinner, while the tip of the tongue tightens the denture and the inside of the tooth.
Tips: be