PC Flame Retardant Single Key Monochrome Touch Switch Electrician
Material: PC flame retardant+copper
Size:6*5*2cm (2.36*1.97*0.79in)
Quantity :1pc
Color:black
100% brand new and high quality
Item type:dc 12- 24v mirror touch switch
1. Specification: 1 capacitive touch switch
2. Working voltage :DC12-24V; Load type :LED lamps and various household appliances; Load power :≤50W; Contact :50X34X10mm
3. Wiring mode: The black and red wires are connected to DC12V-24V input, and the red and blue wires are output to the light source. The black contacts are installed on the back of the mirror.
4. Do not need to touch metal parts through glass. Induction trigger switch work, touch function, high safety performance.
5. This switch is isolated touch sensing switch, suitable for all kinds of media (such as glass, acrylic, plastic, ceramic, etc.) lamp body lamps
Installation steps:
Note: Please turn off the main power switch before installation.
1.Connect the black and red wires to the power input of the switch and another set of red and blue wires as the output of the light bar.
2.Design a touch point on the mirror surface. Contact size is 15 ~ 20mm. First, remove the mercury around the lens contact point. The width of the mercury column removed is preferably 1.5-2CM. Removing the mercury is just a backlight. Clear, touch position at a glance, both beautiful and easy to find the touch switch position.
3.When installing the switch, draw a center cross line on the contact point. There are three arrow lines on the switch box. The three arrow lines should be aligned with any three lines of the horizontal line on the touch point. (Because the center diameter of the touch switch plate is 10mm, the touch sensing area on the touch switch plate must be aligned with the touch point of the mirror mercury part.) Touch frame comes with glue and glue. There is a self-adhesive on the surface, remove the self-adhesive, and stick the alignment position on the lens to mark the position. There are 3 points on the stand aligned with the center point of the mark, and then put the switch in. Just put the switch on and test it. To make sure it doesn't fall off permanently, you can secure the bracket with glass glue.
* Please make payment asap, then we can arrange shipment for you asap.
- Thanks for your bid
* We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
* If you have changed your address, or want us to ship to another address, please change to the new address.
* We ship items to Worldwide. Thank you.
- International Buyers Please Note:
* Please check with your country customs office to determine what these additional costs will be prior to bidding/buying
*We will carefully test every item before shipment.The quality is guaranteed!
- Our working time:
* Hong Kong time : Monday to Saturday 8:30 am to 5:30 pm. * if you send email to us,In our working hours will be resumed within 24 hours. * If you we are not satisfied with us ,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution.
