The FMS HUMMER H1 is coming strong! Unlike the common scale crawlers on the market, FMS HUMMER H1
is a very high-detail RC crawler that comes complete with a full scale
chassis structure and drivetrain system, and an exquisite scale interior
with full door function.
Power comes from a 370 motor. Two servos
respectively control both the switch between high and low speed gears
and the operation of the transfer case, thus switching between rear
drive and four-wheel drive. Both the front and rear differentials also
have a differential lock function, each driven by a servo which can be
locked by remote control. Four metal drive shafts transmit power from
the differential to the reduction gear assembly, commonly known as a
"portal axle". The HUMMER H1 also has a full metal gear-set and 47
ball-bearings. We have included the rear wheel steering as an additional
hidden function, so you now have a total of 4 steering modes! The extra
mode, which can reduce the steering radius by 50%, is ideal in confined
spaces.
The HUMMER H1 uses a front mid-engine layout just like the
real vehicle, and the hood is designed to be flipped forward. Four doors
can all be opened, and the smart door lock mechanism is a separate
unit. The cabin also features a highly detailed dashboard and moving
steering wheel that turns with the main steering. The roof is removable
and the windshield can be lowered forward. The body of the Hummer is
mainly made of aluminum alloy and fiberglass, and the fixing method is
riveting. A 2.4G 7CH digital proportional radio system, a receiver/ ESC/
light control three-in-one unit, 7 servos(including 13g metal gear
servo x 2pcs)
The FMS HUMMER H1 is
presented as it should be – a no compromise “work of art” scale vehicle
that is sure to be one for collectors and enthusiasts alike!
The world's first (chassis, interior, appearance) full simulation RC Hummer H1 model;
Portal axle;
Remote differential lock;
Ball bearings ×47;
Two speed transmission;
2WD-4WD switching;
Metal driveshaft for the whole vehicle;
Metal gear for the whole vehicle;
Hidden function 4WS;
Bumper can be folded forward;
The hood can be opened and has a metal locking mechanism;
Windshield can be folded forward;
Both side doors (4) can be opened;
Scale movable door lock mechanism;
Tailgate can be opened;
Roof can be removed;
Full car simulated rivets;
Exquisite interior;
Soft rubber seats;
Remote control steering wheel linkage;
LED lights x 20pcs;
9g servo x 5, 13g metal gear servo x 2;
370 Brushed motor;
2.4GHz 7CH radio system;
Reserve winch drive control system
1 x 1:12 HUMMER H1 RS
1 x 2.4GHz Transmitter
1 x 2-in-1 Receiver / 40A ESC (installed)
1 x 370 Brushed Motor (installed)
5 x 9g Plastic Digital Servo (installed)
2 x 13g Metal Digital Servo(installed)
1 x USB Battery Charger
1 x Hex Wrench Socket
1 x Product Manual
4 x AAA Batteries for Transmitter
Battery for Kit (Recommended 2S 7.4V 2000mAh 2C XT30 plug; Battery compartment size: L 90mm x W 35mm x H 20mm)
Length: 408mm
Width: 222mm
Height: 162mm
Wheelbase: 272mm
Tire F/R: Φ 78 × 25mm
Approach Angle: 52°
Departure Angle: 39°
Minimum Ground Clearance: 40mm
Motor: 370 Brushed motor
Remote control distance: 30m
Approx. operating duration time: 20mins
Remote control: G7 + R7A Transmitter receiver set