Working voltage: DC 9V to 12V
Maximum load current: less than 10A
Size:3.96in*1.77in*1.14in
Function:Limit & Wire External Button
Original State OFF,(Suddenly, the electricity was cut off, then comes again,the State still is OFF, you need manual turn it ON)
Out State:Momentary Latched Adjusted by the Jumper on the Receiver,(we ship default as Latched, if you need use Momentary to change the Jumper on the Receiver)
Momentary--Jumper on "1&2" Pin
Latched--Jumper on “2&3”Pin

Momentary--Press button"Up", the Motor Forward, Release is Stop. Press Button "Down", the Motor Reverse,Release is Stop.

Latched--Press button "Up", the Motor Forward,Press Button "Stop" is stop.Press Button "Down",the Motor Reverse, Press Button "Stop" is stop
When the receiver output state is “Latched”, we have set it 0.5s time delay for forwards and reverse, it is the Protection function.
We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it.

Learning Code
1.Press the learning button on the receiver for 1 time,the learning indicator ON,Then press the transmitter button up for 1 time (first button default for forward) ,the learning indicator flash 3 times and ON,It mean the first button learning Successfully
2.Then press the transmitter button down for 1 time (second button default for reverse) ,the learning indicator flash 3 times and ON,It mean the second button learning Successfully
3.Then press the transmitter button stop for 1 time (third button default for stop) ,the learning indicator flash 3 times and ON,It mean the third button learning Successfully
Press the learning button on the receiver for 5s,the learning Successfully
4.Then press the transmitter button stop for 1 time again,the learning indicator flash 3 times and OFF,It mean all button learning Successfully

Package: 1pcs Receiver + 2pcs Transmitter
Working voltage: DC 9V to 12V；Working frequency: 433mhz
Standby current:About 10mA; Working current:About 35mA; Maximum load current: less than 10A (less than 60 watts of equipment)
We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it.
When the receiver output state is “Latched”, we have set it 0.5s time delay for forwards and reverse, it is the Protection function.
The wireless remote control switch can control one or more devices in the room. widely used in remote water pump switches, motor, Electric curtain machine, wireless remote control machine switches, wireless remote control sockets,lifting equipment, wireless lamps, window, entrance, Garage Doors，various types of wireless home appliances control and so on.