Allied Signal Honeywell Garrett Airesearch GTCP660-4 Boeing 747 Aircraft gas turbine engine compressor generator auxiliary power unit APU complete, repossessed/seized  assets  from the the bankruptcy of Evergreen Airlines USA, spins freely not damaged or out of hours, removed by Jet Midwest USA 

These were Seized assets from Evergreen Airlines during their bankruptcy- Shipped anywhere land sea and air.

Any further inquiries to this APU and its official documents can be directed to the court of the United States of America using official document number 229-1 CASE 13-13364-MFW FILED 04/21/14

·             MODEL NUMBER = GTCP660-4

·             PART NUMBER = 380716-1-3

·             S/N: P37534

TOME SINCE OVERHAUL: UNKNOWN

·             MATERIAL CERTIFICATION NUMBER:  30660

·             AIRCRAFT TYPE = BOEING 747

·             WEIGHT IMPERIAL = 585LBS

·             WEIGHT METRIC = 265 KG

·             HORSE POWER = 3500 HP

·             COMPRESSED AIR OUTPUT = 485 LB/MIN

·             ELECTRICAL POWER = 2 SEPARATE 60KVA 3 PHASE 400HZ CONTINUOUS DUTY CYCLE 120/208V AC ALLIED SIGNAL AEROSPACE FAA PMA 747 ALL SERIES GENERATORS

·             AMPS PER PHASE =166 AMPS

·             NUMBER OF PHASES = 6 PHASES

·             TOTAL KVA OUTPUT = 120KVA 3 PHASE CONTINUOUS DUTY 400HZ  

·             As the pictures show through the exhaust the blades have the moment arm weight data which is hand written on each of the turbine blades which are easily visible through the exhaust end.

·              

·             Note it’s the same guy who overhauled the other GTCP660-4 APU which is the  OVERHAULED zero hours since overhaul engine we have listed because it’s the same hand writing and common sense and industry experience tells me or anyone else in the know that it is because there are not many of these uniquely, highly, skilled, extremely specialized guys  per approved overhaul faculty like this, because they definitely don’t train and cycle through these types of staff like Mac Donald’s, the same guy who did the previous overhaul on this AR engine also did the  overhaul on the GTCP660-4 overhauled engine we currently have listed online as well, that’s a no brainer, operational eyes needed only.

 

 

WHY SO CHEAP = NO LOG BOOK OBVIOUSLY, EVERGREEN AIRLINES NEVER HANDED THEM OVER WHEN THEY WENT PAIR SHAPED, THEY VANISHED, NO ONE KNOWS A THING ABOUT WHERE THE HELL THEY WENT.

 

§  IF IT DID HAVE A LOG BOOKS I WOULD NOT BE THE OWNER AND THIS WOULD NOT BE ON EBAY OBVIOUSLY AND IT MOST LIKELY WOULD OF DONE ITS HOURS IN THE AIR BY NOW AND BE BACK GETTING PULLED APART AGAIN AND OVERHAULED BY THE SAME GUY THEY CANT REPLACE WHO IS A "ONE OFF" JUST LIKE THIS 1 OFF CHANCE ONLY OPPORTUNITY IN HISTORY. 

 

 

WHO BUYS IT CAN DO WHAT THEY LIKE WITH IT real life past examples – ALL GROUND USE APPLICATIONS …………. subsonic, hyper-sonic and supersonic military missile and aircraft UAV and manned aircraft wind tunnel wind generator, electrical power for several suburbs or small city, ground air and or electrical power for aircraft or special applications that require huge unimaginable must be seen to be believed amounts of electrical power and compressed air supplied  simultaneously at a feather weight the size of a mouse and mobile. Aviation maintenance colleges for in hangar  pressurization of airliner fuselages and aircraft pneumatic systems testing and training, universities, off shore or underground horizontal drilling power sources, high speed gas dynamics technical training and research  , aerospace training aids, research organizations, government proof of concept hydrogen fuel burning turbine energy generation display, healthy boys toys for fun healthy boys, mobile rotor wing aircraft  deployed high energy land mineral and fossil fuel surveying radar electrical power source.

 

 

Fuel examples remembering turbine engines will burn anything that burns from pig fat to its own engine oil and some modern examples of what people like to play with these days is, JET A1, KEROSENE, DIESEL, HYDROGEN GAS, NATURAL GAS, LPG, and the list goes on. 

Happily We insist, promote, support, welcome personal intimate inspection by anyone any time prior to purchasing - can be arranged 24 hours a day 7 days a week - located 15 minutes from Melbourne international airport Victoria Australia. Don’t be afraid to Call text or email and always remember real aerospace people are zero arrogance zero attitude nice people.

 

US citizens get free entry into the USA with zero duties, zero import taxes and tariffs etc., as these come under a special class set out by the United States of America Department of homeland security.




“Return of America made goods” form 3335 which is specifically for a aerospace components like this that are not enhanced, repaired or increased in value in any way shape or form from process or labour work carried out this end and additionally the USA and Australia have a free trade agreement-


We sort all that major soul draining stuff out like paperwork.

 

99.99999% of everything I’ve ever done that’s fun and worth doing, It always eventually goes back to country of origin with a new happy US owner in some way shape, form or another –



We can easily happily arrange Shipping air or sea to anyone anywhere anytime with our shipping accounts or yours FedEx - DHL - UPS etc. or whoever you may wish.



Close PAYING friends with the USA TO AU – AU TO USA big-time SEA/AIR freight guy.

 

Making shipping zero nightmare for me and you.

 

Please click sellers other items t these other I have

We can easily happily arrange Shipping air or sea to anyone anywhere anytime with our shipping accounts or yours FedEx - DHL - UPS etc. or whoever you may wish.



 Close PAYING friends with the USA TO AU – AU TO USA big-time SEA/AIR freight guy. 

 

  Making shipping zero nightmares for me and you.

 

  Please check out the other listings I have

     

We currently have listed below 10 once in a life time opportunity, "too good to be true" aircraft gas turbine engines for sale at affordable down to earth prices. So healthy boys can now afford to play with "High Value" and “High Fun value" healthy boy’s toys.


Australian qualified Aircraft Maintenance Engineer. Engine - Airframe - Avionics - military - civilian in charge of this listing.

Company : AEROSPACE DYNAMICS AUSTRALIA
Call or email Paul for details anytime +61 473 491 820

prcturbinetechnologies AT outlook.com.au

 

ATTENTION:  EBAY USERS CUT AND PASTE THE EBAY ITEM NUMBERS BELOW INTO THE WWW.EBAY.COM SEARCH BAR AND HIT ENTER WHICH IS THE USA SERVER AND YOU WILL BE ABLE TO VIEW ALL THE GAS TURBINE ENGINES WE HAVE LISTED UP ON EBAY,

REMEMBER EBAY.AU HIDES ALL THE FUN STUFF FROM YOU. 

1.      eBay item number: 196353025753

2.      eBay item number: 196362611176

3.      eBay item number: 196352782700

4.      eBay item number: 196365548012

5.      eBay item number: 196368972553

6.      eBay item number: 196351999063

7.      eBay item number: 196371809844

8.      eBay item number: 196368853580

9.      eBay item number: 196369423004

10.   eBay item number: 196363132702

11.   eBay item number: 196369548509

12.   eBay item number: 196363280392

13.   eBay item number: 196369567907

14.   eBay item number: 196369557654

15.    eBay item number: 196369572111  


 Please click “see other items” To view.

 

Call or email Paul for details anytime +61 473 491820


 prcturbinetechnologies AT outlook.com.au

  

        

Formally "aerodynamics2006" (1077) 100% Positive Feedback for the last 18 years. Member since: 29-Apr-06 in Australia. Famous globally: With a unique impeccable feedback history of hard work across the whole planet for building, selling, supplying information regarding scientific, medical, industrial lasers, aircraft gas turbine engines, PRC laser high power industrial fast axial flow Co2 turbine compressor overhauls, repairs and sales, and PRC laser High Voltage power supply overhaul sales testing and support, please ask me for my feedback list: here is a direct cut n paste snippet from my feedback history of 3 of over a 1000 happy customers…... "he knows his stuff PRC LASER TURBO FLOW COMPRESSOR Turbine REBUILDS, REPAIRS, SALES, Worldwide. (#173112978945 ) US $7,000.00 zedindustries (1398)"-"International shipment was early and hassle free SKF OIL INJECTION KIT SKF-729101-300-MPA NEW UNUSED COMPLETE KIT HYDRAULIC PRESS (#173131406727) AU $1,900.00 jtheriot85 (100)" -"Thanks Paul hope you can help me again soon COHERENT KRYPTON ION ARGON ENTERPRISE II LASER SYSTEM #260699097185) US $4,200.00 6321theron (1255)"

 

WORLDWIDE CUSTOMER REFERENCE LIST FOR AEROSPACE DYNAMICS,FOR PRC LASER TURBINE COMPRESSOR AND HIGH VOLTAGE POWER SUPPLY OVERHAULS, REPAIRS, CHANGE OVER’S, TESTING, SALES, SERVICE AND TECH SUPPORT

 

UNITED STATES GOVERNMENT

Head Physicist / LSO: Joshua Hadler CLSO

Applied Physics Division (686)

NIST LABORATORY UNITED STATES [email removed by eBay]

ph: [phone removed by eBay]

fx:  [phone removed by eBay]

 

US GOVERNMENT NIST LABORATORY

325 Broadway St. M.S. 686.00

Boulder, COLORADO 80305

UNITED STATES OF AMERICA

Attn: Mary Gorman

Wright, Sue (Fed) [email removed by eBay]

Gorman, Mary (Fed) [email removed by eBay]

 

U.S GOVERNEMNT NIST LABORATORY

Kyle Rogers

Lead Mechanical engineer                               

Lead Calibration

 

U.S GOVERNEMNT NIST LABORATORY

National Institute for Standards and Technology

325 Broadway

Boulder, CO 80305

[phone removed by eBay]

[email removed by eBay]

 

NASA

JET PROPULSION LAB

Address: 4800 Oak Grove Dr, Pasadena, CA 91109, United States

P: [phone removed by eBay]

F: [phone removed by eBay]

Federal Laboratory Consortium

111 West Jackson Blvd.

Suite 1412

Chicago, IL 60604

Phone: +1-847-686-2298

Email: [email removed by eBay

 

U.S AIR FORCE

Dept. of Defence U.S GOVERNMENT

USAF AFTC, AIR FORCE TEST CENTER

307 E. Popson Avenue

Edwards AFB, CA 92354-6842

United States

Laboratory Representative: Douglas Hoffelt

AFTC ORTA

E: [email removed by eBay]

P: [phone removed by eBay]

F: [phone removed by eBay]

 

K and S services

MSPR-LLC

Servo drive overhaul, servo motor,

Electro hydraulic servo valve

Overhaul specialists.

Electrical hydro mechanical repair

And testing Remanufacturing.

Hanh Do,  [email removed by eBay]

John Fleming, [email removed by eBay]

1608 John Papalas Drive

Lincoln Park, Michigan  48146

[phone removed by eBay] UNITED STATES

 

MURPHY LASER SERVICES

MARC MURPHY

GLOBAL SENIOR ELECTRONICS ENGINEER 

OEM PRC LASER CORP USA, 

LASER SERVICE TECHNICIAN/TRAINING/ 

PH: 973 229 9754

BANGOR PN UNITED STATES

 

PM PACKAGING MEXICO

Address: Producción 17, Mesa de Otay, 22435 Tijuana, B.C., Mexico

Phone: +52 664 624 0320

Marco Vazquez

[email removed by eBay]

 

Vermont Plastic Specialties Inc.

209 Blair Park Rd,

Williston, Vermont 05495, United States

Phone: +1 802-879-0072

802879639-2043

Mike -shop manager

Joseph- financial controller

[email removed by eBay]

 

R.E.D. Industries, Inc.

671 E. 9 Mile Rd.  Hazel Park,

MICHIGAN 48030-1957. UNITED STATES

CONTACT NAME: PAMELA MATHEWS (president)

EMAIL: [email removed by eBay]

CONTACT NAME: DAVID MATHEWS: PHONE CELL: [phone removed by eBay]

EMAIL: [email removed by eBay]   Office [phone removed by eBay]

 

Precision Fab Inc. (PFI)

Address: 259 Elm St, Aylmer, ON N5H 3H3, Ontario Canada

Phone: +1 519-773-5244

Henry Bergen IV

t. [phone removed by eBay]

c. [phone removed by eBay]

[link removed by eBay]

Henry Bergen IV

[email removed by eBay]

 

HK Laser & Systems

Kevin Puumala

Service Manager

1296 Humbracht Circle

Bartlett, UNITED STATES

Office:   [phone removed by eBay]

Mobile:  [phone removed by eBay]

 

PFI USA Engineered Solutions

5963 Jaysville-St Johns Road

Greenville, Ohio, 45331 UNITED STATES

PFI USA ENGINEERED SOLUTIONS

5963 JAYSVILLE, ST JOHNS ROAD GREENVILLE,

OHIO, 45331, UNITED STATES OF AMERICA

CONTACT NAME: David Rabel

CONTACT PH: [phone removed by eBay] EMAIL: [email removed by eBay]

 

LASER TECH NEW YORK

Address: 3212 U.S. 9, Cold Springs,

NEW YORK 10516, United States

Phone: +1 845-265-5540

Vice President: John baby Varvara

[email removed by eBay]

[phone removed by eBay] office

[phone removed by eBay] fax

 

Precision Mounting Technologies Ltd.

515 58th Ave SE, Calgary, AB

T2H 0P7

Phone

Call us toll free: [phone removed by eBay]

Within Calgary: [phone removed by eBay]

[email removed by eBay]

 

Artios DieS

Tijuana B.C. Mexico

+52(664)285 6213

Nicolas Gonzalez Owner/president

[email removed by eBay]

English/Mexican Translator/ friend for Nick

Anntonio Soberanes <[email removed by eBay]>

 

HBI Services Inc.

Director of Manufacturing

Rick Nacke <[email removed by eBay]

P.O. Box 4609, Tulsa, OK 74159 UNITED STATES

1313 S. Lewis, Tulsa, OK 74104 UNITED STATES

(918) 665.8220 | FAX: (918) 665.8225| Cell :( 918) 269.0726

WWW.HBISERV.COM

 

HBI Services Inc.

Jason Foster,

HBI internal Maintenance training, Programming and Planning

P.O. Box 4609, Tulsa, OK 74159 UNITED STATES

1313 S. Lewis, Tulsa, OK 74104 UNITED STATES

(918) 665.8220 | FAX: (918) 665.8225| Cell:( 918) 269.0726

 

Hasty-Bake Headquarters,

Tulsa Grill Store & Grill Manufacturing Facility

Richard Alexander   PRESIDENT/OWNER

[Email removed by eBay]

1313 S. Lewis Tulsa, OKLAHOMA 74104 UNITED STATES

Toll Free: 800-4AN OVEN or [phone removed by eBay]

Phone: [phone removed by eBay]

Fax: [phone removed by eBay] 313 S. Lewis, Ave. Tulsa,

Oklahoma 74159 UNITED STATES

Phone: [phone removed by eBay]

 

ADAMS TECHNOLOGIES

Ellen Adams PRESIDENT/OWNER DIRECTOR.

[email removed by eBay]

SDS/AdamsTech

6235 Lookout Road, Suite A

Boulder, COLARADO 80301 UNITED STATES

[phone removed by eBay] Service: [phone removed by eBay]

Laura Venegas Adams Technologies

Cel y What’s app [phone removed by eBay] (USA)

E-Mail:  [email removed by eBay] [link removed by eBay]

PRC laser technician for Adams tech   [email removed by eBay]

 

Servicios Calados y Mas S de RL de CV

ADAMS TECH PRC LASER TECHNICIANS in Mexico FOR turbines and power supplies,

León Cavallo 263 Colonia Vallejo Delegación Gustavo a Madero

México D.F. C.P. 070870   R.F.C. SCM080606F54

[email removed by eBay]otify: PG Servicios Aduanales, S.C.

Montecito 38, piso 25, oficina 28, Col. Napoles.

Tel: 01(55) 5488 0094 Angelica Jimenez [email removed by eBay] SofiaGonzález  [email removed by eBay]

 

ArtiFlex Manufacturing | ITS Division Automotive stamping plant line

Scott Wyckoff | Technology & Continuous Improvement Specialist 

Grand Rapids 731 Broadway Ave

Grand Rapids, MICHIGAN 49504 UNITED STATES

P: [phone removed by eBay]

F: [phone removed by eBay]

 

Zed Industries, Inc.

P.O. Box 458  3580 Lightner Road

Vandalia, OHIO 45377 UNITED STATES

Owner/President: Peter Zelnick

Email: [email removed by eBay]>

Phone: [phone removed by eBay]

Fax: [phone removed by eBay]

 

Pacific Die Services Inc.

7626 Baldwin Place Whittier, CALIFORNIA 90602 UNITED STATES

Rick Synadinos  PRESIDENT/OWNER

Web: [link removed by eBay]

Rick Synadinos Email: [email removed by eBay]

[phone removed by eBay] land line

[phone removed by eBay] (Cell)

[phone removed by eBay] (Fax)

 

Crystal Industries Inc.

[phone removed by eBay]

28870 Phillips Street

Elkhart, INDIANA 46545 UNITED STATES

[email removed by eBay]

KEVIN ANTHONY, PRESIDENT OWNER,

RICH RUSSEL MAINTENANCE MANAGER

 

PACIFIC RADIATOR - Langley BC

Fahim Naheemi <[email removed by eBay]>

#102-20583 Langley Bypass, Langley, British Columbia,

Canada, V3A 5E8

Sales: [phone removed by eBay]

Toll free: [phone removed by eBay]

Fax: [phone removed by eBay]

Administration: [phone removed by eBay]

Toll free: [phone removed by eBay]+

 

K&K Manufacturing Inc.

951 Nine Mile Road NW, Sparta, MI 49345 UNITED STATES

[phone removed by eBay]

Fax # [phone removed by eBay]

Toll Free Order # 1(800) 876-4286

Skype ID: KK Manuf.

Email: [email removed by eBay]

webmaster:[email removed by eBay]

Colin Kidder,

B.E.E , ELCTRONICS ENGINEER

EMBEDDED SYSTEMS ENGINEER

 

Electro-Techno INC (Les Services)

https://electrotechno.com

Address: 2055 Rue Roy, Sherbrooke, QC J1K 1B8, Canada

Phone: +1 866-566-5151

Electronics engineer in Sherbrooke, Canada

JEAN BOULAY 8195665157

 

DR EPIC MFG

Address: 3989 County Rd 40 NW, Garfield,

MN 56332, United States

Phone: +1 320-834-2003

 

D.R. EPIC-TMS United States of America 

Email: [email removed by eBay]

Phone: [phone removed by eBay] or [phone removed by eBay]

 

A STELLA LASER SERVICE

DEAN RASINK FACTORY ROFIN LASER - FINN POWER TECHNICIAN

Or  [phone removed by eBay].

107 Ridgeview Drive

Starbuck, MN UNITED STATES 56381

 

Prommetizizdeliya,  Belarus,

StalNik (ODO Prommetizizdeliya)

Belarus, Baranovichi

Stecenko Nikolai Nikolaevich  

Warehouse: Brestskaja obl. town

Baranovichi street: Proletarskaja 46

Tel. +375 (163) 68-09-09,68-08-09

Mob. +375 (29) 685-03-27, +375(29) 726-82-17

EMAIL :  [email removed by eBay]

www.stalnik.by

Покупатель:

ОДО «Промметизизделия

(ALC «Prommetizizdeliya»)

Адрес: 225406 Республика Беларусь,

Брестская обл., г. Барановичи,

ул. Брестская, 226-В

УНП 290472675

р/с BY24BAPB30124416700110000000

в ОАО

«Белагропромбанк», г.Минск, пр.Жукова,3

Тел/факс +375 (163) 68-09-09, 68-08-09

Бухгалтерия: +375 (163) 60-80-28

Эл.почта: [email removed by eBay]

в лице директора

Стецко Николая (Stetsko N.),

действующего на основании Устава

 

Meik u. Karsten Müller Gbr

Steintechnik

Lerchenweg 1

35713 Eschenburg-Hirzenhain, Germany

Tel.: +49 (0) 2770 816

Fax: +49 (0) 2770 819

[email removed by eBay]

[link removed by eBay]

KARSTEN -  PRESIDENT/OWNER

LASER COMPANY IN GERMANY

PHONE 4915123031054

 

VENOKA DENMARK

Ole Søndergaard

Mobile +45 2459 7802 | [email removed by eBay]

Michael Tudborg

Mobile +45 2033 1552 | [email removed by eBay]

Michael Tudborg – Venoka A/S <[email removed by eBay]> 

Thu, 12 Jan 2017, 17:57 

Hi Paul, Just a little update…. The box was in perfect condition when it arrived.

It´s now connected and running like new again

Thanks…  Best regards Michael Tudborg – Venoka A/S

Adr.: Mads Bjerres Vej 6 – 7500 Holstebro

Tlf.: 97412833 Direkte.: 20331552

Email.: [email removed by eBay] – Web.: [link removed by eBay]

Venoka A / S | Mads Bjerres Road 6 | 7500 Holstebro | Tel. +45 9741 2833

 

Laser Lab Wales Ltd   UNITED KINGDOM

CRAIG EDWARDS. PRESIDENT/OWNER

Ely Distribution Centre Argyle Way  

Cardiff CF5 5NJ

Tel: 07943103491

Email:[email removed by eBay]

 

GIMAT srl ITALY

TURBINE CUSTOMER

Claudio Magri PRESIDENT/OWNER

[email removed by eBay]

Via Dell'Artigianato 1-17

40064 Loc. Ponte Rizzoli

Ozzano dell'Emilia (Bo) - Italia

Tel +39 051 799573

Fax +39 051 798260

Web Site.: [link removed by eBay]

Descrizione: cid:image001.gif@01CBFB61.610E07A0gimat_claudiomagri

 

FAGO Technik GmbH & Co KG  GERMANY

Christian Braun

Gewerbestraße 20-2, D-78244 Gottmadingen

Tel/Fax: 07731-5915091/093

[link removed by eBay]

Christian Braun.  [email removed by eBay]

 

Lister Engineering  UNITED KINGDOM 

William Lister  PRESIDENT/OWNER

PRIMA POWER, PRIMA INDUSTRIES PRC/ CONVERGANT LASER USA  TECHNICIANEUROPE.

Director/Engineer at Lister Engineering And Fabrication LTD. A proud partner ofTTM laser s.r.l.

 

Bristow Laser Systems

PETER BRISTOW, PRESIDENT/OWNER AND PRC LASER TECHNICIAN

Manufacturer OF LASER SYSTEMS

24 Scammel St •(03) 9305 3166

Office Phone: + 61 3 9305 3166

Office Fax: + 61 3 9305 3788

Peter's Mobile: + 61 0438 364 118

Office Email:  [email removed by eBay]

Office Address: 24 Scammel Street

Campbellfield, VIC AUST 3061 AUSTRALIA

Bristow Laser Systems

120 National Blvd • (03) 9357 0088

 

Preston Displays Pty Ltd

Richard PRESTON PRESIDENT/OWNER PHONE:0412842189

[email removed by eBay]

Plastic fabrication company in Dandenong South, Victoria

Address: 2/16 Johnston Ct, Dandenong South VIC 3175 AUSTRALIA

 

ACUFORM CANBERRA AUSTRALIA

MATT PRESIDENT/OWNER PHONE 0418455574

Phone (02) 6260 2533

Fax (02) 6260 2544

Email [email removed by eBay]

5/73 Sheppard Street

Hume, ACT, AUSTRALIA

 

MACS ENGINEERING

Manufacturer in Mackay, Queensland

Address: 1C Victoria St, Mackay QLD 4740 AUSTRALIA

ROSS MACS PRESIDENT/OWNER PHONE 61498186347

Phone: (07) 4951 6555

JENNIFER TANDY

1800 88 MACS or

1800 88 6227

Telephone

(07) 4951 6555

2D Victoria St, Mackay, QLD

My contact is 07 49516517 or mobile 0427563397

 

Ballarat Pressings

KEITH PARRY, PRESIDENT/OWNER/ PHONE 0409177463 GREG PARRY OWNER/SON PHONE0417157969

[link removed by eBay]

Address: 3181 Old Melbourne Rd, Warrenheip VIC 3352 AUSTRALIA

Ballarat Pressings. 3181 Old Melbourne Rd Warrenheip 3352. Ph: 03 5334 7040.Fax: 03 5334 7440.

 

Advance Laser Cutting

Darryl Wilkes PRESIDENT/OWNER

[email removed by eBay]

Laser cutting service in Henderson, Western Australia

Address: 139 Sparks Rd, Henderson WA 6166

Phone: (08) 9437 5550

Western Australia   6166 AUSTRALIA

PH: (08) 9437 5550

Fax: (08) 9410 2799

Email:[email removed by eBay]

 

Glyde Metal Industries Pty Ltd

RUSSEL PRESIDENT/OWNER

PHONE 61Z 409 577 215

Metal fabricator in Dandenong South, Victoria

Address: 65 Zenith Rd, Dandenong South VIC 3175 AUSTRALIA

Phone: (03) 9791 3402

 

IMTS LASER SPECIALISTS.

Peter Tucker DIRECTOR/OWNER,

PRIMA POWER/PRIMA INDUSTRIES ITALY,

FARLEY LASERLAB AUSTRALIA, PRC LASER USA,

CONVERGENT LASER USA, IPG FIBER LASER,

PRC LASER TECHNICIAN. PHONE: cell 0412326542.

MIKE HIGGINSON: PRIMA POWER/ PRIMA INDUSTRIES ITALY,

FARLEY LASERLAB, CONVERGENT LASER,

IPG FIBER LASER, PRC LASER SERVICE

ELECTRONICS ENGINEER/ TECHNICIAN. PHONE: cell 0413966576.

(International +61 3 9314 9888)110 Proximity Drive Sunshine West, VIC 3020

Australia  

 

JP Laser Pty. Ltd.

Paul McCormack  PRESIDENT/OWNER

Phone: (03) 8339 7412

Fax: (03) 9308 397

Factory Address: 18A Yellowbox Drive Craigieburn Vic. 3064 AUSTRALIA

Postal Address: PO Box 3445 Caroline Springs Vic. 3023 AUSTRALIA

Paul McCormack  OWNER

PHONE: 61 412 924 892

 

MEBIUS Pty Ltd

IGOR.  Director /Owner

B.E.E  -ELECTRONICS ENGINEER –

EX OEM FACTORY ROFIN SINAR 

LASER SERVIVE ENGINEER

BYSTRONIC POWER SUPPLY O/H REPAIRS,

CONVERGANT CV5000 DV DC-DC HV SMPS HVPS OVERHAULS

MELBOURNE, AUSTRALIA

Ph: 0404040920

Email: [email removed by eBay]

 

THINK LASER

DENNIS JIGAU. Director /Owner

PHONE: 0424152557

Laser cutting service in Carrum Downs, Victoria AUSTRALIA

[link removed by eBay]

(03) 8566 9133

 

Trigg Industries.

Mildura Laser Cutting Pty Ltd

Fast Farm Fencing

Head Office 27 Dyar Avenue, Cabarita VIC 3505 Australia

RODNEY TRIGG, Director /Owner

Postal Address: PO Box SM403, South Mildura VIC 3501 AUSTRALIA

Tel: 61 3 5022 2219

Mobile: 0417 347986

Fax:61 3 5022 2291

[link removed by eBay]

 

ABC CUTTING INDUSTRIES

DAVID PISASALE Director /Owner

2 RUTHERFORD ROAD

SEAFORD 3198 VICTORIA AUSTRALIA

PH: 97751025

 

Yarroweyah Engineering

4346 Murray Valley HWY

Yarroweyah VIC 3644 Australia

TELEPHONE: +61 3 5873 2383

FAX: +61 3 5873 2578  

EMAIL: [email removed by eBay]

 

CNC MAN Pty Ltd

Address: 46 Greenfield Rd, Capalaba QLD 4157

AUSTRALIA

Phone: (07) 3206 4409

OWNER; WAYNE HOPE

CNC Machine tool sales and service

A GRADE CERTIFIED SENIOR INDUSTRIAL ELECTRICIAN +

EX OEM FACTORY FANUC, CO2 LASER SERVICE TECHNICIAN.

 

Expert Laser Solutions

2/ 3 David Muir Street, Slade Point QLD 4740 AUSTRALIA

[email removed by eBay]

PRESIDENT/OWNER, PAT MULHERN

PRC/ OEM BRISTOW LASER TECHNICIAN   (07)4955 3331

 

JT Profile

4 Avey Road

Mount Gambier South Australia 5290

AUSTRALIA

Tel: 08 8725 7857

Mobile: 0400 233 421

Email: [email removed by eBay]

OWNER: Josh Knightly

 

Heidelberg General Engineering

27 Commercial Drive

Thomastown Victoria

Australia 3074

Telephone: (03) 9464 1088

Fax: (03) 9464 1359

Email: [email removed by eBay]

OWNER : JOHN

 

Concrete Equipment Australia Pty Ltd

CEA Consolidated Industries

136-140 Maffra Street

Coolaroo

Victoria 3048

Australia

Phone: +61 3 9309 1500

Fax: +61 3 9309 1566

Email: [email removed by eBay]

OWNER: MIKE

 

             

This listing and or parts this listing are owned and developed by Aerospace Dynamics Aust, and are COPYRIGHT 2024 it comes under the protection of the eBay laws firstly, if you copy it and or sections of it there will be consequences firstly from eBay Inc.